Rockets Across America VI

[tdragger]

Lets wait until Steve gets s**t faced than really go to work on his bike, not for Steves eyes but I think we can get it to look something like this.

We are definitely thinking along the same lines...

 

[tdragger]

Nice do I need New Bulbs ?

No, we can use the existing bulbs. If you want new bulbs then it would be a good time to change them out.

 

[HellFire]

what do I need for the H4 relay for the R3T w/ it's single headlight?

The same thing but for singles. Browse his website for the single with longer leads, if you don't find what you want just email him. Jim is easy to deal with and very helpful.

 

[Jackson]

We are definitely thinking along the same lines...

I think it needs pinstriping.

 

[tdragger]

JDuke, the single headlight relay kit on this page (Link Removed) should work for you.

Measure from the back of your headlight, around the right side of the steering head, to just under the frame to see if the standard "fairing" mount is long enough (16").

Next, measure from the same spot under the frame behind the steering head, down the right side of the frame, to your battery. See if this is less than 61".

 

[warp9.9]

I volunteer for the h4 relay also ....send me a link to what i need to purchase. and if I need to get replacement bulbs and what type.... wow this is going to be great watching my bike get mods while I get **** faced ... Count me in for any mods you want to do just sent me the parts list I will get them ordered ...

sounds like technical bike mods across America 1 now. I hope the **** doctors don't have to do my second kidney surgery before this event goes down. Should have the answer the end of next week. So far it has not shut down like the other one did. I am crossing my fingers

 

[rainman]

Before or after a quart of shine?

after of course thats when we do the best work

 

[rainman]

Lets wait until Steve gets s**t faced than really go to work on his bike, not for Steves eyes but I think we can get it to look something like this.

steve wont know the difference dave
oh cant forget the pink balls to go with it

 

[CADFather]

Under the left side cover would be fine .... my bike is stock so I assume there is room what would I need to get / Bring

If you don't already have the horn, check at Advance Auto for a WOLO brand horn. It is a Steple horn, just rebranded and available for about $10 less. The installation is a breeze.

CAD

 

[HellFire]

Last fall I picked up one of those Wolo air horns (the one piece that looks like the Nautilus). I tested it against the single car horn I already had mounted on the bike, and I couldn't tell that is was any louder than the single car horn. There might have been a slight difference but it wasn't enough to justify replacing what I already had for the extra money. So I returned it.