tdragger
Living Legend
I volunteer my bike for a stebel horn installif any one is interested
That should be fairly straightforward. Would you be satisfied with it installed under the left side panel and, if so, do you have the room for it?
That should be fairly straightforward. Would you be satisfied with it installed under the left side panel and, if so, do you have the room for it?
scowherd
Top Fuel
Under the left side cover would be fine .... my bike is stock so I assume there is room what would I need to get / Bring
scowherd
Top Fuel
I volunteer for the h4 relay also ....send me a link to what i need to purchase. and if I need to get replacement bulbs and what type.... wow this is going to be great watching my bike get mods while I get **** faced
... Count me in for any mods you want to do just sent me the parts list I will get them ordered ...
tdragger
Living Legend
The Stebel Horn.
A Horn Relay Kit. Either the kit that some places offer with the horn or an Eastern Beaver horn relay kit. Here is one from BikerHyway: Plug-n-Play Wiring Harness for Stebel Nautilus Compact Air Horns
A short bolt w/ nut and washers to mount to the airbox. Basically, we will drill a hole in the airbox and hang the horn off the bolt. Simple and effective mount. I'll have to get back to you on the size of the bolt.
Since I'm trailering in, I'm planning on bringing some tools so I will make sure that I grab my drill.
A Horn Relay Kit. Either the kit that some places offer with the horn or an Eastern Beaver horn relay kit. Here is one from BikerHyway: Plug-n-Play Wiring Harness for Stebel Nautilus Compact Air Horns
A short bolt w/ nut and washers to mount to the airbox. Basically, we will drill a hole in the airbox and hang the horn off the bolt. Simple and effective mount. I'll have to get back to you on the size of the bolt.
Since I'm trailering in, I'm planning on bringing some tools so I will make sure that I grab my drill.
tdragger
Living Legend
I volunteer for the h4 relay also ....send me a link to what i need to purchase. and if I need to get replacement bulbs and what type.... wow this is going to be great watching my bike get mods while I get **** faced
Here ya go. Link Removed
You will want the Fuse Holder option.
scowherd
Top Fuel
Nice do I need New Bulbs ?
HellFire
Legend
- Joined
- Aug 16, 2008
- Messages
- 4,518
The same model with low beam switched lead is the next one down for another $5 if interested. You can just connect the leads together for now and worry about locating a switch later if you think you might want that option down the road. It's a handy thing to have, just not a necessity, lets you turn off the headlights with just a flip while doing any work on the bike that requires the ignition to be on.
scot in exile
Living Legend
Lets wait until Steve gets s**t faced than really go to work on his bike, not for Steves eyes but I think we can get it to look something like this.
tdragger
Living Legend
A couple of questions first:
1) does the R3T have an H4 type bulb? Has anyone confirmed this?
2) if it does have an H4, is there sufficient room inside the headlight shell to house the relays? This determines what type of kit to order.
If you can pull your headlight and snap a picture, that would help a lot with the recommendation.
Similar threads
- Locked
