Stalling


I would suggest injector pulse in the recording
if u manage to pull this off we may b able to put those recordings on each of our laptops and side by side compare the good and the bad.
off the wall stuff i have seen cry products computer/ecu go bad and just keep increasing injector pulse width.
 
Does not look like you choose what to capture. I rode with it connected and it shows my date, but no info captured. Is that because no problems. Here are a couple of screen shots .. notice Nov. 3
 

Attachments

  • Screenshot_20211103-165002_TuneECU.jpg
    50.7 KB · Views: 18
  • Screenshot_20211103-165108_TuneECU.jpg
    52.4 KB · Views: 16
Rode 1.25 hrs today in busy traffic, following school bus on purpose, no stall. Leaving scanner connected, ride each day. Have 1 week before dealer drop off. Need a stall.
 
maurice said:
Rode 1.25 hrs today in busy traffic, following school bus on purpose, no stall. Leaving scanner connected, ride each day. Have 1 week before dealer drop off. Need a stall.
Click to expand...

may b i can help
u r going to have to slect the data u want to record then hit record. the data should be recorded even without problem.
i think u have to pull seat to get to dongle to push the little button on dongle. if u stop by i will lend u my two foot extension so u can put the dongle i the bag and u wont have to pull seat.. although i dont remember your seat as being hard to pull.
 
Seat is easy removal. Don't think my scanner has a button to push. Will look in the morning. Maybe once connect to tuneecu there is selection on app to choose what to record. Will check in the morning.
Thanks for that. Will see first if I find what's needed. Without connecting to bike app does not show any such selection.
 
maurice said:
Hermon. Before I head out with scanner in search of a stall, there is nothing I need to do to app other than connect to bike and ride? There is a "data" selection on app that I assume after ride will give info.
Click to expand...
You need to go the link i provided earlier and read it:--> Android TuneEcu Information

pay special attention to the bottom of that webpage and read the information about how to record the sensor data
 
maurice said:
Rode 1.25 hrs today in busy traffic, following school bus on purpose, no stall. Leaving scanner connected, ride each day. Have 1 week before dealer drop off. Need a stall.
Click to expand...
Did you try to twist throttle forward, just for the heck of it? I haven't had chance to ride, otherwise would've done it.
 
Zutt said:
Did you try to twist throttle forward, just for the heck of it? I haven't had chance to ride, otherwise would've done it.
Click to expand...
Sure did, multiple times. this is clearly not repeatable at will.
 
Recorded today's ride and as expected, No stall.
Question. The sensor screen had 4 parameters already checked to record. I checked everything. Maybe 20. Instructions said recording button turns green and at right of each figures should show red dots. Why only the 4 and not all? Maybe those 4 are the only ones needed?
Pray I stall by Tuesday!
 

Attachments

  • Screenshot_20211104-151905_TuneECU.jpg
    69.9 KB · Views: 18
Last edited:
You must log in or register to reply here.

Similar threads

Stalling
Replies
3
Views
1K
Journeyman
Menu
Log in
Register