Stalling

[Frans]

Recorded today's ride and as expected, No stall.
Question. The sensor screen had 4 parameters already checked to record. I checked everything. Maybe 20. Instructions said recording button turns green and at right of each figures should show red dots. Why only the 4 and not all? Maybe those 4 are the only ones needed?
Pray I stall by Tuesday!

only those with a red dot are selected for recording. It's in the link given.

 

[maurice]

only those with a red dot are selected for recording. It's in the link given.

That is what I posted. I selected in boxes with checkmark all.
I think the solution is not to connect bike to app before making selections.

 

[maurice]

Just remembered re-read instructions and still not showing all selected sensors with red dots per instruction.
States go to sensor screen. List, select what you want to record.
Tap rec button twice, turns green, red dots showing to right of what you want recorded.
THEN, select bike and CONNECT.
Again, I selected all items to check, did the above and before connecting hit record button twice and only 4 items with red dots!!!
Anyone see what is wrong?

 

[EskimoPie]

The nut behind the handlebars is clearly loose

 

[Frans]

Anyone see what is wrong?

Never tried it myself so with this part can not help. If i have some time this weekend will also try and let you know.

 

[maurice]

The nut behind the handlebars is clearly loose

I knew that was coming!!

 

[maurice]

Well maybe those 4 parameters would provide a clue. Don't know what else to do but check all boxes.

 

[TURBO200R4]

Well maybe those 4 parameters would provide a clue. Don't know what else to do but check all boxes.

the more sensors/data selected the slower it works
for example the trans makes the 1-2 shift (u can feel it ) then 1 or 2 seconds latter it shows up on scanner the more info on scanner the slower it works.
for example when it stalls the scanner may show 2200 rpm.
by having the rpm and the speedo sensors u could show the dealer that it is stalling.
now u have the code prob so in my bussiness u fix the clutch code problem and see if that fixes the other prob.
sometimes we have to back out of scanner and start over to get it to work.
i would say make sure ign is in run position and u r getting (reading) the info like tps/rpm ect before trying to hit record and try to select other sensors one at a time.
and no i have not read the instructions. going on what we do with our scanners.

 

[EskimoPie]

Well maybe those 4 parameters would provide a clue. Don't know what else to do but check all boxes.

OK, I went and played with mine. Agree with Herman, don't check all the boxes, only check boxes that you want to see the data for and that will help diagnose your issue. The more you select, the slower the sample rate is and you want a high sample rate to try and capture the important piece of data that helps you diagnose a stall.

When I played with it, I was able to recreate your issue. When you hit the "sensors" button, you have two choices: "list" and "log". The ones you have checked under "list" are the ones that you'll see on the screen and that the bike is reading information for. You can't check all the boxes because there isn't room on the screen for them all. Or at least if you check all the boxes when you go back and look at the list you'll see that it automatically unchecked the ones that wouldn't fit on the screen. I'd suggest checking only about 6 or 7 boxes to keep your sample rate high.

Then the ones that get a red light need to be checked under the "log" button (after you hit the "sensors" button. Those will be the ones that get recorded to a file.

 

[TURBO200R4]

great info
i noticed that u can select a targeted idle speed so if u have that u could compare that to rpm to see what ecu is shooting for and what actual rpm is.