ramair cracked

[Mike188]

Took the bear claw off, tank up, real good check over no problems, air sensor in nice an tight and definately no cracking of the rubber.

+1 lifted the tank today and had a good inspection and there is no sign of splitting or cracking. Had the ramair on 6 or 7 months now and 6k plus

 

[bruce aussie]

My replacement turned up today, complete kit again I was just expecting a filter.

 

[CanberraR3]

Well get Julie to fit it this time; you're obviously too ham fisted.
Keep us posted......

 

[gibbon]

All fixed (i hope ) just need to fit it tonight and fingers crossed it holds together for a while .

Let us know how it holds up Dave
I have 3 uni filters on there at the moment as I'm nervous of putting the replacement one on they sent out

 

[dave64]

Let us know how it holds up Dave
I have 3 uni filters on there at the moment as I'm nervous of putting the replacement one on they sent out

No good , i could not get the Ramair to stay on every time i tightened the clamps it would work off . so i went back to std box under the seat . I just want to get on my bike and ride and don't need any more power so **** it it will stay like this now .

 

[hogweed]

No good , i could not get the Ramair to stay on every time i tightened the clamps it would work off . so i went back to std box under the seat . I just want to get on my bike and ride and don't need any more power so **** it it will stay like this now .

I know your pain.

 

[dave64]

Well guys as you may know my Ramair filter cracked and i received a replacement . But the tight a$$ bastards only sent a filter no fly lead or crankcase filter , so since i sold the replacement i had to remove items from my bike and guess what the crankcase breather filter is cracked too . It is like the rubber is the wrong compound or will not stand the heat or the oil fumes gets to it etc . so i will be buying one for the purchaser from supercheap to get him a complete kit .

 

[CanberraR3]

What a load of rubbish - the filter I mean. Bet no one's ever seen a K&N do that.

 

[cusso ken]

No good , i could not get the Ramair to stay on every time i tightened the clamps it would work off . so i went back to std box under the seat . I just want to get on my bike and ride and don't need any more power so **** it it will stay like this now .

I think something's are better left alone, my dear old Dad had a saying don't Fu** around with things you know nothing about, and he was a Heavy Plant Mechanic,

 

[dave64]

What a load of rubbish - the filter I mean. Bet no one's ever seen a K&N do that.

Richard

Its like the rubber has got soft or melted , i know i didn't over tighten this one or only get it on half way , i believe it was bad or wrong rubber in these early ones . Well lets hope they have changed it for the new ones .