Lift adapter for Roadster

[VABird]

OOPS! I see your last post wasn't even directed to me. Maybe that's why I didn't follow!
Anyway, I just got the R3 into the shop today and will start to work on a new lifting design similar to the T-Bird's Jack-Be-Quick.
Should be a few months before production can begin.
See at Jack-Be-Quick.com

 

[TriumPhil]

You mean www.jack-be-quick.com ?

 

[VABird]

You mean www.jack-be-quick.com ?

Yes. Right now only for T-Birds, but next on the plate is for R3s

 

[Gregger]

Got a first hand look at the Big Blue bike lift at the Motorcycle Supershow in Toronto. Has all the accessories to lift a Rocket. Easy, stable and expensive.

BIG BLUE SITE

 

[VABird]

Got a first hand look at the Big Blue bike lift at the Motorcycle Supershow in Toronto. Has all the accessories to lift a Rocket. Easy, stable and expensive.

Jack-Be-Quick for the Rocket should be available for under $200 and use a standard ATV-M/C lift/automotive floor jack.

 

[VABird]

www.Jack-Be-Quick.com is nearly finished with their R3 lifting system. It stays attached to the bike so it's able to be used away from home in an emergency as well as home. One person lifts the bike easily. It should be available in a few weeks. Send contact info via the website.

 

[VABird]

The Jack-Be-Quick lifting brackets are now available for the Rocket III.
The setup for the R3 is not yet on the website, but it is the same price as the STD T-Bird set, so you can order it as long as you
BE SURE TO FILL IN THE MOTORCYCLE INFORMATION so I send you the right set.
I'll also need to know if you have a front dresser bar (engine guard) as it will require a set of spacers without them.
Please go to JBQ STD (Rear & Front Brackets) - Jack-Be-Quick

Bob @ JBQ

 

[wsk3]

The Jack-Be-Quick lifting brackets are now available for the Rocket III.
The setup for the R3 is not yet on the website, but it is the same price as the STD T-Bird set, so you can order it as long as you
BE SURE TO FILL IN THE MOTORCYCLE INFORMATION so I send you the right set.
I'll also need to know if you have a front dresser bar (engine guard) as it will require a set of spacers without them.
Please go to JBQ STD (Rear & Front Brackets) - Jack-Be-Quick

Bob @ JBQ

My order is placed!

 

[Jag]

If you have any picture with it installed that would be great!!

 

[Cruzn6]

Got a first hand look at the Big Blue bike lift at the Motorcycle Supershow in Toronto. Has all the accessories to lift a Rocket. Easy, stable and expensive.

BIG BLUE SITE

Just purchased a Big Blue a few weeks ago with adapters for the Rocket and my Goldwing plus 2 mounts that will lift most other bikes. As previously stated, it is expensive, but a fine piece of equipment that is a joy to use.