215hp street build

[Tripps]

Math is amazing

Interesting, but this guy is a good example of why I hate videos and prefer articles. People are so verbose, that could have been a one minute read.

 

[Kevin frazier]

Interesting, but this guy is a good example of why I hate videos and prefer articles. People are so verbose, that could have been a one minute read.

one minute man 87 strokes and done

 

[Kevin frazier]

I wonder how much weight a carillo piston is at 9000rpm on a stroker rocket, Aint but one man on the planet that might be curious, or probably already knows @R-III-R Turbo

 

[Tripps]

one minute man 87 strokes and done

87 strokes in a minute would definitely be a heart attack for me. Slow and easy at this age.

 

[R-III-R Turbo]

I wonder how much weight a carillo piston is at 9000rpm on a stroker rocket, Aint but one man on the planet that might be curious, or probably already knows @R-III-R Turbo

Oh I don't know dude, think it was just under 8000lbs or something. I gave all engine specs to Carrillo and they built the pistons & rods accordingly. I just close my eyes and hope for the best
From my own files the stock 8.7:1 2294cc piston assembly was about 515g, and the two sets of turbo stroker pistons were 402g (8.6:1) and 390g (8.0:1) but that's just the piston, no rings pin or locks.
I'm currently running the 8.6:1s to see how it goes with the max boost a C30-94 supercharger will make on a 2472cc engine at 9000rpm (haven't got that far yet, I don't know). I might switch to the 8.0:1s if needed to drop a point or 2 on effective compression ratio.

 

[Kevin frazier]

9000rpm what a rush

 

[leatal]

redone thank you Neville

Could you give us the outside diameter of the shim to fit properly under spring and into piston?

 

[sweettennbabe]

It all sounds like man on motorcycle **** to me.

 

[Kevin frazier]

Could you give us the outside diameter of the shim to fit properly under spring and into piston?

.012”

 

[Kevin frazier]

Could you give us the outside diameter of the shim to fit properly under spring and into piston?

9.5mm .373”, is spring size, with .010” clearance in the piston, 9.5mm min. 9.75mm max.