Tuning a 2023 onwards R3

[Protonhound]

I just need to get the ECU out (when I've figured out how to do it) and check the serial number. Some '23 bikes still had the '22 ECU. I've been given the numbers for the '22 and revised '23 units. If mine falls within those it's a '22.

My bike was registered in June 2023, so this being the UK it's possible it was a '22 bike.

Why do you want to go through all that when you can use tuneecu to flash the Penner tune and be done with it as we have and who told you that this is not possible on a '23 bike?
I'll connect to my ECU later after work and see if it shows a serial number.

 

[atomsplitter]

I just need to get the ECU out (when I've figured out how to do it) and check the serial number. Some '23 bikes still had the '22 ECU. I've been given the numbers for the '22 and revised '23 units. If mine falls within those it's a '22.

My bike was registered in June 2023, so this being the UK it's possible it was a '22 bike.

It should be under the seat next to the battery. I'll verify that once I get the 2023GT I made a deal for in my garage (later this week).

 

[Gimlet]

It should be under the seat next to the battery. I'll verify that once I get the 2023GT I made a deal for in my garage (later this week).

It is. It's slotted next to the battery case on the left hand side of the bike. Whether the serial number wil be visible just by removing the battery I don't know. May be on the other side and the unit will need lifting out.