Stuck in fifth and clunking, -after advice, hints tips and tricks TIA

Noir_Nikko · Jun 10, 2020

mr hunt said:
I've borrowed that (and the bar that goes with it) from the dealer a couple of times. I had planned to take that schematic to a machinist along with a couple of cartons but haven't got around to it yet.

My alternative was to source a bolt that matched pitch and diameter and taper the end to fit...but haven't got around to that either...i have an 11 month old so spare time is a long forgotten luxury...

A 3rd option is order one from Triumph if you are feeling wealthy!

We will take this opportunity to summon @Mittzy and @Ishrub who might know of one on the east coast somewhere...both are resourceful fellas

Good to know thank you
Heading to Triumph tomorrow to pick up some bits I ordered the other week (irrelevant to this) will hint at the option to borrow
Have asked for quotes from a couple of engineer mobs here too.

**** like this holds up the entire job, ah well back to work soon anyway

Ishrub · Jun 10, 2020

Noir_Nikko said:
Good to know thank you
Heading to Triumph tomorrow to pick up some bits I ordered the other week (irrelevant to this) will hint at the option to borrow
Have asked for quotes from a couple of engineer mobs here too.

**** like this holds up the entire job, ah well back to work soon anyway

Get one from Triumph in USA and have a member post it over for you via USPS etc. much cheaper than here in Oz!
Australian dealer list price

Port Macquarie Motorcycles Online Spares

Online Shopping for Spare Parts And Accessories. OEM Parts Catalogs for SUZUKI , Triumph , YAMAHA

c8software.com.au

T3880200 - T3 PULLER ALTERNATOR R

Price
Au$277.90

UK VAT exempt price

Fowlers Parts | Genuine Motorcycle Parts & Spares.

Fowlers Parts are the largest UK supplier of genuine motorcycle parts & spares for thirteen manufacturers of motorcycles. Offering fast delivery on all orders.

us.fowlersparts.co.uk

9

Puller, Alternator Rotor
T3880200
Share this part

1-3IN STOCK

US$47.64 excl. VAT(£37.40)

-

QuantityMinus

US dealer list price

9:

ALTERNATOR ROTOR PULLER T3880200
",C"

1

Ships within 1 to 2 business weeks

US$65.91

$65.91

Ishrub · Jun 10, 2020

I see you found Paul's drawing already.
Good to see people searching the forums.

Want to Buy - Alternator Puller Tool

Hi all! Looking to buy or rent the alternator puller tool PN: T3880200 Please pm me price. Shipping to Aurora, CO 80017. Paypal preferred

www.r3owners.net

Ishrub · Jun 10, 2020

Interesting to see if a cheap alternative could be made with an M32 x 1.5 threaded industrial cable gland in metal or even nylon. Lots to choose from with various thread portion lengths, but not sure if better images are available.

https://au.element14.com/c/cable-wire-cable-assemblies/cable-management/cable-glands-locknuts-fixing-tools/cable-glands?thread-size-metric=m32-x-1.5#

Ishrub · Jun 10, 2020

Here is an example with brass nickel finish. Au$12.46

I registered and used the search function and the images clear up.

I sorted them by cost, cheapest first!

Nylon, Nylon with fiberglass, nickeled brass, other metals etc.

https://au.element14.com/w/c/cable-wire-cable-assemblies/cable-management/cable-glands-locknuts-fixing-tools/cable-glands/prl/results?thread-size-metric=m32-x-1.5&pageSize=100&sort=P_PRICE

You could make a nylon/rubber/wood plug with the 30 degree chamfer to clamp inside the cable gland. There should be at least 46mm thread to use and the nuts could possibly be locked against each other to form the Hex head to extract.

https://au.element14.com/pro-power/pp002684/cable-gland-brass-16mm-22mm/dp/3112045

PP002684 -
Cable Gland, M32 x 1.5, 16 mm, 22 mm, Brass, Metallic - Nickel Finish

Ishrub · Jun 10, 2020

This one is available in stock $17

The smaller cable size with same M32 x 1.5mm thread COULD mean thicker tube walls for greater strength, but it may just be the inner plastic glans that vary in internal opening diameter.

53112140 -
Cable Gland, Skintop® MSR-M Series, M32 x 1.5, 7 mm, 15 mm, Brass, Metallic - Nickel Finish

https://au.element14.com/lapp-kabel/53112140/cable-gland-msr-m32/dp/1178976

mr hunt · Jun 10, 2020

I knew you were the right man for the job

mr hunt · Jun 10, 2020

I use a medium size rattle gun on the extractor and it takes every bit of torque to break the rotor loose so I am wondering if part of the expense of the tool is in the steel used to make it? Something too soft risks stripping I would think

Ishrub · Jun 10, 2020

Good point re torque required Hillbilly redneck don't work all the time.

Once you go to Stainless steel the cost is as much as the tool part nearly!

Au$100.51

1.740.3203.51 -
Cable Gland, Hygienic, M32 x 1.5, 18 mm, 21 mm, Stainless Steel

https://au.element14.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=15001&langId=43&productSeoURL=hummel&storeId=10184&partNumber=2707646&krypto=0heGZGn3Fwe%2FuIYwU8Ze0uD42K9ou%2Bv5MBYIB5kEXJnrlXSc0j%2Bp0VCaT42qqTg4b4t4mZkuBFsYkNGbv%2FKpjw%3D%3D

Noir_Nikko · Jun 11, 2020

we

Ishrub said:
Good point re torque required Hillbilly redneck don't work all the time.

Once you go to Stainless steel the cost is as much as the tool part nearly!
Au$100.51

1.740.3203.51 -
Cable Gland, Hygienic, M32 x 1.5, 18 mm, 21 mm, Stainless Steel

https://au.element14.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=15001&langId=43&productSeoURL=hummel&storeId=10184&partNumber=2707646&krypto=0heGZGn3Fwe%2FuIYwU8Ze0uD42K9ou%2Bv5MBYIB5kEXJnrlXSc0j%2Bp0VCaT42qqTg4b4t4mZkuBFsYkNGbv%2FKpjw%3D%3D

Getting one made from high tensile $100

Any alternatives to the clutch basket tool, might order one this arvo otherwise?

Cheers gentlemen!!

Stuck in fifth and clunking, -after advice, hints tips and tricks TIA

Noir_Nikko

.020 Over

Ishrub

That's my name ....built like a truck

Port Macquarie Motorcycles Online Spares

Fowlers Parts | Genuine Motorcycle Parts & Spares.

Ishrub

That's my name ....built like a truck

Want to Buy - Alternator Puller Tool

Ishrub

That's my name ....built like a truck

Ishrub

That's my name ....built like a truck

Ishrub

That's my name ....built like a truck

mr hunt

Living Legend

mr hunt

Living Legend

Ishrub

That's my name ....built like a truck

Noir_Nikko

.020 Over

Similar threads

Stuck in fifth and clunking, -after advice, hints tips and tricks TIA

.020 Over

That's my name ....built like a truck

That's my name ....built like a truck

That's my name ....built like a truck

That's my name ....built like a truck

That's my name ....built like a truck

Living Legend

Living Legend

That's my name ....built like a truck

.020 Over

Similar threads

Privacy & Transparency

Privacy & Transparency