Stalling

[maurice]

Since Herman could not see the metal tab in the pic I sent, here is another with an arrow.
Those with stalling, let me us know if your metal piece is as close to silver lever as this one.

 

[Van_R3Rider]

Here is mine. Looks fine I guess

 

[Mighty Mouse]

Here is mine. Looks fine I guess

Yours is like mine. The one Maurice has is twisted and black (calm down) I guess to keep from catching cleaning cloths and such. Does the new one keep it from stalling and if so why. When I go in next month for my oil change I'll inquire about it. Good pics Maurice.

 

[maurice]

Here is mine. Looks fine I guess

Looks different than mine for some reason. different design part?
My new one looks just like the original, just not bent.
Pretty sure problem solved as that idle does seem up a tad when pulling clutch in.
When I had the problem if I slightly turned throttle coming to a light it never stalled.

 

[maurice]

Yours is like mine. The one Maurice has is twisted and black (calm down) I guess to keep from catching cleaning cloths and such. Does the new one keep it from stalling and if so why. When I go in next month for my oil change I'll inquire about it. Good pics Maurice.

Thanks. I would point dealer to that part. I will talk to my dealer tomorrow for warranty bag replacement and mention others will stall but no error code. Why.

 

[Van_R3Rider]

Looks different than mine for some reason. different design part?
My new one looks just like the original, just not bent.
Pretty sure problem solved as that idle does seem up a tad when pulling clutch in.
When I had the problem if I slightly turned throttle coming to a light it never stalled.

Try one thing for me in the garage. with bike off, press the clutch lever and hear for the tick sound( that's when the metal part presses/depresses the actual switch. Does it tick with the clutch all the way in or in the middle? That might help us to fix ours. Might need to adjust the bend angle of the metal piece.

 

[maurice]

Try one thing for me in the garage. with bike off, press the clutch lever and hear for the tick sound( that's when the metal part presses/depresses the actual switch. Does it tick with the clutch all the way in or in the middle? That might help us to fix ours. Might need to adjust the bend angle of the metal piece.

Silent the entire time pulling lever in. Yours ticks? Could be the problem.

 

[Van_R3Rider]

Silent the entire time pulling lever in. Yours ticks? Could be the problem.

Here is a better angle. Looks similar to yours.

 

[Van_R3Rider]

Silent the entire time pulling lever in. Yours ticks? Could be the problem.

Yes! Mine ticks about 3/4 clutch lever in. Took a video. Check this out.

 

[maurice]

Here is a better angle. Looks similar to yours.

I don't think so. Yours is flatter, mine has a twist. May mean nothing. But that click you speak of might.