Quick Release Sissy Bar for the Roadster

Mittzy said:

This is the kit....
The machined posts replace the M8 & M10 bolts in your rear fender covers (4 bolts in total) and the bracket (Once fitted to your back rest) will locate the front posts first then drop down into the rear posts.
Once the bracket is in position the bolts can be tightened using an 8mm &6mm hex key/wrench, then this bracket wont be moving anywhere in a hurry. Yes you will have to carry two alen/hex keys/wrenches with you to remove and refit.
The machined posts sandwich the steel bracket.

Click to expand...

Mittzy said:

This is the kit....
The machined posts replace the M8 & M10 bolts in your rear fender covers (4 bolts in total) and the bracket (Once fitted to your back rest) will locate the front posts first then drop down into the rear posts.
Once the bracket is in position the bolts can be tightened using an 8mm &6mm hex key/wrench, then this bracket wont be moving anywhere in a hurry. Yes you will have to carry two alen/hex keys/wrenches with you to remove and refit.
The machined posts sandwich the steel bracket.

Click to expand...

hanso said:

Done well there Tony, Shame I am not wanting QR or I would be in for sure

Click to expand...

Big G said:

Are these being made down under, or in the US? I have to say that I am interested, depending on shipping costs, timing, etc. It looks like a pretty clever setup, simple, elegant. Greg

Click to expand...

Mittzy said:

I cant take the credit... it was designed by nox273.
But thanks

Click to expand...

Mittzy said:

Made in Australia... and shipping word wide
I should look at posting ALL the US bound parts to one person (R3tex maybe) the can forward from there.
Suggestions or volunteers?????

Click to expand...