Quick Release Sissy Bar for the Roadster

[ricochet]

This is the kit....
The machined posts replace the M8 & M10 bolts in your rear fender covers (4 bolts in total) and the bracket (Once fitted to your back rest) will locate the front posts first then drop down into the rear posts.
Once the bracket is in position the bolts can be tightened using an 8mm &6mm hex key/wrench, then this bracket wont be moving anywhere in a hurry. Yes you will have to carry two alen/hex keys/wrenches with you to remove and refit.
The machined posts sandwich the steel bracket.

That's fantastic. I am really looking forward to getting a set!

 

[HansO]

This is the kit....
The machined posts replace the M8 & M10 bolts in your rear fender covers (4 bolts in total) and the bracket (Once fitted to your back rest) will locate the front posts first then drop down into the rear posts.
Once the bracket is in position the bolts can be tightened using an 8mm &6mm hex key/wrench, then this bracket wont be moving anywhere in a hurry. Yes you will have to carry two alen/hex keys/wrenches with you to remove and refit.
The machined posts sandwich the steel bracket.

Done well there Tony, Shame I am not wanting QR or I would be in for sure

 

[Big G]

Are these being made down under, or in the US? I have to say that I am interested, depending on shipping costs, timing, etc. It looks like a pretty clever setup, simple, elegant. Greg

 

[Mittzy]

Done well there Tony, Shame I am not wanting QR or I would be in for sure

I cant take the credit... it was designed by nox273.
But thanks

 

[Mittzy]

Are these being made down under, or in the US? I have to say that I am interested, depending on shipping costs, timing, etc. It looks like a pretty clever setup, simple, elegant. Greg

Made in Australia... and shipping word wide
I should look at posting ALL the US bound parts to one person (R3tex maybe) the can forward from there.
Suggestions or volunteers?????

 

[HansO]

I cant take the credit... it was designed by nox273.
But thanks

But you Got the Job Done, Kudo's where they are due Mate

 

[Mittzy]

Thanks but lets not forget Les (Ozrider) he's been doing stuff in the back ground--- Top Fella.

 

[HansO]

Aaahh if I told him any more how good he is at creating that stylish new looking Claw he'll probably brain me next time he sees me, I just like to acknowledge a classy act where it is warranted and you made it happen where others just talk about it.

 

[R3Tex]

Made in Australia... and shipping word wide
I should look at posting ALL the US bound parts to one person (R3tex maybe) the can forward from there.
Suggestions or volunteers?????

I would be happy to do that

 

[Mittzy]

That's great mate.
What do you think the cost would be to further post them on to others in the US? kit would weight around 2.5kg.