Jacking up to lube the splines

Bedifferent said:

My own little design, but I also decided to permanently install the Jack Be Quick bracket. I'm not sure if it still available as I just checked the site and nothing came up under lifting brackets.

Edit...I did find the bracket on eBay

Jack-Be-Quick; Triumph Rocket III R3 lifting system | eBay

Click to expand...

It is still available on the website. It's also cheaper for USA customers for sure on the website. Since EBay has such massive shipping capability, it may be cheaper on EBay for overseas buyers. I was told by one customer that it was $28 higher than EBay price to get it to Australia vs. about $65 higher on the website. I don't make a dime on shipping. That's what it cost me!

Jack-Be-Quick | Rocket III (2005-2017)

cusso ken said:

Just a quick shot of the jig on the ATV lift , I use a simple lynch pin to secure the jig onto the lugs but you can use a nut and bolt ,but the bike is secure on the jig ,using this jig and lift the bike is perfectly balanced and you can raise either wheel or both at the same time it just pivots on the locating pins

Click to expand...

Do you have the dimensions for making one of these please. i see lots of designs on here, this one i prefer, but im looking to see if anyone has the measurements for me to be able to make one.
Thanks
Rich