Can anyone recommend a power distribution unit ?

[Ezayakyala]

I’m looking for something that connects to the battery and is smart enough to detect if the motorcycle is on or off and provide switched power to a GPS unit for example. I know quad lock has a smart charger that detects the battery output voltage and shuts off if it’s goes below a certain threshold. Do these units work the same way?

I don’t know if I’m comfortable enough tapping into the power cables myself to be honest. Am I out to lunch or does the above exist somehow ?

 

[TURBO200R4]

Run a relay so that ignition will trip the relay then you can run the power from where ever you want.

 

[minoru]

バッテリーに接続し、バイクのオンかオフを検出して、GPS ユニットなどにスイッチング電源を供給できるスマートなものを探しています。クアッドロックには、バッテリーの出力電圧を検出し、一定のしきい値を下回ると電源をオフにするスマート充電器が搭載されていることは知っています。これらのユニットは同じように機能しますか?

正直に言うと、自分で電源ケーブルを触るのが十分に快適かどうかはわかりません。私は昼食に出かけていますか、それとも上記のようなことが何らかの形で存在しますか？

私のRocket3Rの場合
これを付けてあります。
Amazon.co.jpで購入できます。

 

[Gregger]

Switchable fuse blocks are also available online. There are many types. Here is the first one I came across with a quick search. https://www.amazon.com/RANDPOW-Electrical-Interface-Indicator-Automotive/dp/B0C7KQSHHM I don't know how good or bad this particular brand might be...

You could also purchase a simple fuse block and have it powered with a relay as Turbo mentioned.

 

[Moz]

Something along these lines may do the trick - I don't know for sure, I just stumbled on this product the other day so I do not vouch for or endorse it.

Home - HEX ezCAN

OR SPOIL YOUR MOTORCYCLE-MANIC PARTNER

www.hexezcan.com

Looks like Denali and a number of others make similar types of plug 'n' play interfaces but I've not seen anything specific for the 2.5's

 

[dougl]

It looks like this would do it. It allows for supplying continuous or switched power to a device and is Canbus compatible. You have to find a wire that supplies switched 12v power, like to the tail lights, and Positap this to a wire which connects to the FZ-1. The other 2 power inputs (hot and ground) are from the battery. Then you can select whether switched or continuous power goes to you device by the position of a fuse on the FZ-1.

Installation | Fuzeblocks.com

www.fuzeblocks.com

 

[Kevin frazier]

I use and like the fuzeblock dougl posted above.

 

[dougl]

I use and like the fuzeblock dougl posted above.

What circuit do you use for the switchable 12 volt source?

 

[Kevin frazier]

My fuzeblock has six circuits, and how you install fuse for that circuit makes it on with key or off until you turn on.

 

[dougl]

My fuzeblock has six circuits, and how you install fuse for that circuit makes it on with key or off until you turn on.

I meant where do you get the 12v switchable power from to the FZ-1?