Search results for query: *

  1. Stillserving

    BIKE LIFT DIY SCREW TYPE LIKE

    I'll be watching intently. My dad just bought a big blue for his Goldwing, so I can get an up-close look at it when I'm over there, or ask for info. I've been wanting to do this for awhile, but just haven't wanted to pull the trigger on parts. I know the jack screw and bearing/nut for it are...
  2. Stillserving

    Bike not running

    Pull the fuses and look down in the plastic "fuse box" Sometimes the spade terminals get hot over time when excess current runs through them and the plastic melts either insulating or causing the terminal to back out and not make good contact with the fuse, causing an open circuit.
  3. Stillserving

    Momentary voltage drop? / check engine light

    If you tried to start with a dead battery and it failed, it will sometimes set the CEL. That particular code will usually clear itself after a few successful startups (I believe it's 3 good cycles). Sometimes it won't though. Worst case, if you can't get ahold of a reader, disconnect the battery...
  4. Stillserving

    No spark at all three coils

    That looks low for the battery. The ECU is very particular with the voltage it likes to see. Is the engine cranking over when you hit the start button, just not firing? Also the low tension side of the coils (spade terminals) are prone to "opening up" or spreading just enough to make bad...
  5. Stillserving

    Want to Buy Exhaust for abs roadster

    Here's someone selling a Dave Platt single Shorty: https://www.r3owners.net/threads/dave-platt-single-shorty.53360/
  6. Stillserving

    Momentary voltage drop? / check engine light

    Check the condition of the voltage regulator wiring and the connections. May be loose or dirty / wet at the connector causing it to be intermittent and the light to come and go.
  7. Stillserving

    Relocating Coolant Tank - Left side details

    That's why everyone removes it. Not needed and it opens up that side cover area for other things. Could be horn, voltage regulator, or in your case NOT THOSE things, so you could place your overflow bottle in there. Step 1) Remove EVAP cannister. Step 2) Remove overflow bottle. (Steps 1 and 2...
  8. Stillserving

    Metal cord/rope around diff housing???

    ☝️
  9. Stillserving

    Trying to find Creah Bars, no luck so trying to interest a company.

    Yeah, cause no one on here or that has ever bought a 30K bike has EVER dropped it...:rolleyes:
  10. Stillserving

    Front brake upgrade

    Yeah, Pretech is long gone. I am definitely looking for something to upgrade to before I put anything else to my '17 Roadster. If you find anything, please keep this thread updated.
  11. Stillserving

    Looking -

    I have an older RIIIR, so no help there, BUT....I'm thinking heavily on getting a 1200XE to the stable, so would love to hear some +/- of that from you....Sorry for the derail but that happens on this site daily....Squirrel!
  12. Stillserving

    For Sale K&N RU-2780 kit

    Yes, They will fit under the bearclaw to keep stock look.
  13. Stillserving

    New Member from Maryland

    Welcome. Where abouts in MD?
  14. Stillserving

    winter handguards for 06

    I ride year-round and found with my first set of battery gloves (most are lithium nowadays), when I REALLY needed them (sub 20* temps) they didn't work/shut off. Called Gerbing and they said, "Yeah they're not meant to be used that low". WTF? You can also try adjusting your Barkbuster a little...
  15. Stillserving

    Changing out bars

    How tall do you want? Maybe some BigNorm sized bars?
  16. Stillserving

    Changing out bars

    These are about the tallest I think you can get away with w/out changing cables (and even then I re-routed to get a little extra slack). The same T-Bars mentioned/pictured above. https://www.r3owners.net/threads/custom-t-bars.36881/page-3
  17. Stillserving

    Destinations / must see roads and stops

    The Harley had a trailer that was too heavy and pushed him wide in a turn. He was riding it out in the talcum powder type dirt/sand and was bringing it back on the road when he came upon a big culvert. Dropped down and the trailer pushed him hard into the other side. Bent up the trailer hitch...
  18. Stillserving

    Destinations / must see roads and stops

    It's been awhile, so my route memory may be slightly off. The total distance covered was around 5300 miles, and included 20 or so states...can't remember because some were literally, crossing the border, taking a pic of the welcome sign and then heading back on our way, including hitting 4...
  19. Stillserving

    Starter

    You said you're only getting 10v at the switch. What is your battery voltage reading?
  20. Stillserving

    Rear wheel bearing/need a new rim

    Definately an option depending on what the machine shop says.
Back
Top