Valaas
Turbo
PM sent
Valaas
Turbo
Head gone. Those head bolts gave me a hell of a fight
Edit: Head removed while waiting for street mod cams and forged pistons to arrive. Next up is removing the oil pan and push out stock pistons. I already have new piston ring sets so I'll file ring gaps to "Neville specs" too.
Edit: Head removed while waiting for street mod cams and forged pistons to arrive. Next up is removing the oil pan and push out stock pistons. I already have new piston ring sets so I'll file ring gaps to "Neville specs" too.
Last edited:
Kevin frazier
Widowmaker!
New liners, dont cheap out now 
. I mean without proper seal its all a waste. 
, Neville also has valve springs you may need
. And dont take too much off the deck if youre gonna clean that head surface up. But looking good, please, carry on.
. I mean without proper seal its all a waste. , Neville also has valve springs you may need. And dont take too much off the deck if youre gonna clean that head surface up. But looking good, please, carry on.
Valaas
Turbo
Liners have only seen 44.000 gentle, stock'ish kms so no new linersNew liners, dont cheap out now
Compression was very good also. Piston change is just to replace eggshells with boost capable ones.
But I got the virus now, so when I replace the starter turbo I got now with one proportional to a 2.3L engine, who knows what else appears on the shopping list
Cheers
Edit: 38.000 kms. Don't know how I got that wrong. It sure as h*ll hasn't moved an inch since august last year.
Last edited:
Neville Lush
www.nevillelushracing.com
- Joined
- Feb 26, 2007
- Messages
- 1,042
- Location
- Victor Harbor South Australia
- Ride
- Speed Triple 1050 Dirt Track sidecar,H2750Roadrace sidecar W800 Kawasaki
What was your compression values?
Valaas
Turbo
205-200-200 measured at WOT
Last edited:
Neville Lush
www.nevillelushracing.com
- Joined
- Feb 26, 2007
- Messages
- 1,042
- Location
- Victor Harbor South Australia
- Ride
- Speed Triple 1050 Dirt Track sidecar,H2750Roadrace sidecar W800 Kawasaki
Cool, I trust you have a good gauge.
Valaas
Turbo
Yes, I went my all too often used route: Cheap fleabay one, questioning the readings and finally getting the proper tool for the job.
Slow but steady learner
Valaas
Turbo
Hillbilly HES
Quite an amount of debris in catch filter 1
First piston out
Quite an amount of debris in catch filter 1
First piston out
Mongler07
Turbocharged
btw... the WOT thing when doing a compression test is a HUGE myth... its been debunked
AWESOME job though!
