TORS and Ramair - need a tune that's in-between...

I'm sure they do. If you can't find one on eBay go to the dynojet web sight (the company that makes power commander) and they should have them since it's a dynojet product. Maybe also google dynojet lambda sensor bypass for your year model. That may pull it up from British customs or revzilla, j&p, ect...
 
This is a great informational thread for me. When I replace my stock exhaust and add Ramair, it will serve me well. Thanks guys, for all the smarts that I will be needing later!!!
 
I just loaded the tune. I don't have the sensor bypass yet, so I left the sensor plugged in and checked. I don't have access to a dyno, but I will see if I can observe any difference between having the sensor and removing it. I will report back any observations.
 


Just uncheck the sensor even if you don't remove it yet. I ran for a while with it still in. The tune will run better with it unchecked though
 
After you download the tune don't forget to turn ignition off for a minute, then back on, run iscv check, tps check, then run reset adaptives, then crank engine without touching throttle, warm up until fan kicks on, then let idle for 12 minutes
 
After you download the tune don't forget to turn ignition off for a minute, then back on, run iscv check, tps check, then run reset adaptives, then crank engine without touching throttle, warm up until fan kicks on, then let idle for 12 minutes
Well I had to go meet some people for a ride. Didn't have time to do the 12 minute tune, I will do it tomorrow.

That said, the bike has never run better. This is a great tune. I would love to know how much horsepower increase I am getting. I can definitely notice the difference. On top of that, I have zero deceleration popping.

Thanks again. I will report back once I get the O2 bypass installed.
 
I don't really know. I just did it following the directions of the guru HansO