Something Failed, let’s find it! Transmission Analysis.

Its only speculation until he crack the cas and like new said clean before you role her over otherwise it might be like dumping a bucket of sand in her first. Myself id would have dropped the sump first for inspection and cleaning. This can still be done. Evem after that when you role her over keep role her towards the transmission keep any bits there.

Rob dropped the sump first...lots of fragments of teeth :mad:
 
Some glory shots of the intake porting and smexy Ti valves
21593FB9-D577-42D6-A07B-E93E6CAEE1CA.jpeg 61F95F04-C530-41D7-ABA2-6F54FBD6FB99.jpeg 599FF732-B006-47CC-B46F-F921ED0AE092.jpeg
 
Figured while it’s out, I check the valve train. Just need a paint marker so I can mark the gears and chain.

Some shots of the cams and valve train. Cam number 2305, need to reach out to Megacycle for the exact specs still:
07D0865D-1D1C-443D-AF63-06DD93F28F69.jpeg 6BCCAA83-8E37-4113-81D0-977B0EC1630A.jpeg 455553DF-67CF-4EA4-95F3-A47B9929E55E.jpeg
 
Figured while it’s out, I check the valve train. Just need a paint marker so I can mark the gears and chain.

Some shots of the cams and valve train. Cam number 2305, need to reach out to Megacycle for the exact specs still:
07D0865D-1D1C-443D-AF63-06DD93F28F69.jpeg 6BCCAA83-8E37-4113-81D0-977B0EC1630A.jpeg 455553DF-67CF-4EA4-95F3-A47B9929E55E.jpeg
once you get into these motors they are a dream to work on..good work:thumbsup:
 
Mine are Carillo from Carpenters anyway, JE is the TTS stage 3 :thumbsup:
CP bought out carrillo not sure how long ago but its been a while. The only person I know that is running Carrillo piston and rods is Pedro. They were pre 2010 I believe. Don't ask me how I know :( should have kept the buggers 9:1 bought before tha carpenter kit came out.
 
Back
Top