For Sale Sold Touring Handlebars From 2013 R3T

[Jay]

Sold

Selling the handlebars that came on my 2013 Rocket Touring. They are 35” wide and give great leverage. Hand position is good too, but swapped them out for Valkyrie handlebars that are about 1.5” narrower. These bars were just too wide for me. They aren’t new, but they are in good condition and just need a good cleaning and polishing. Not wrecked or bent.

in looking at other handlebars on our Rocket site, I am not sure if these are OEM Triumph or from another touring bike that was throttle-by-wire. These don’t have the little extension on the throttle side, however the bar is symmetrical with castle cutouts on the throttle and holes to route wires internally to the bar. If they were narrower I’d keep them, but I am happy with the Valk bars and Thunderbird risers.

 

[Kevin frazier]

They are different from the 08 bars I just let go, the ends and that slot, mark bought mine to put on a roadster, hope controls line up for him and fit right, I’ll post back to let you how they work for him, in case someone else tries to do same thing

 

[Ralsmith]

What is the difference between touring and roadster bars, are they different widths, pull back?

 

[Tripps]

I think they're completely different, the Touring sweep back at the ends, to get closer to the rider, as the distance to the yoke is greater, non touring tend to be straighter

 

[Jay]

In my experience, that extra sweep gives a more comfortable hand position for longer days in the saddle.

 

[Mark Johnson]

They are different from the 08 bars I just let go, the ends and that slot, mark bought mine to put on a roadster, hope controls line up for him and fit right, I’ll post back to let you how they work for him, in case someone else tries to do same thing

Kevin those bars don't look like factory to me. They have the control wires running through the bar and exit at the bottom. My bars have the clips on the outside to hold the wires from the controls. My guess is the controls and master cylinders are all the same. Looks to me like the touring bars are Roadster Bars pulled in towards the rider more. All of the Rockets I have seen, the cables run down the side of the bar. I could be wrong because I have not seen every year Rocket in person.

 

[Kevin frazier]

Kevin those bars don't look like factory to me. They have the control wires running through the bar and exit at the bottom. My bars have the clips on the outside to hold the wires from the controls. My guess is the controls and master cylinders are all the same. Looks to me like the touring bars are Roadster Bars pulled in towards the rider more. All of the Rockets I have seen, the cables run down the side of the bar. I could be wrong because I have not seen every year Rocket in person.

Mine should deliver tomorrow, the ends are very different, haven’t looked at part numbers but now you got me thinking I’m gonna go to hermys and look

 

[1olbull]

SOLD!
Where to PayPal?

 

[Kevin frazier]

None of my business but I read, first 50 plus shipping gets these.

 

[1olbull]

None of my business but I read, first 50 plus shipping gets these.

I didn't read the thread - just pounced.
Are they sold already?
If so, my apologies.