Pic of Triple K&N's Under Bearclaw
BigNorm said:
I done got it done. I put the filters on. Put the air temperature sensor in the breeze and taped off the hole in the air filter box .
Click to expand...
I cut some of the claw away and had to notch the 3rd filter to clear. I'll raise the cut on 1 and 2 next week when I have time. I ran the 12 minute tune, shut it off then started it again. I played with the throttle and this thing was torquing at the straps. I can't wait for the snow to melt to try it out.
 
EasTexRIII said:
Looks good buddy! Howz da crank case gonna breath if you taped off the hole in the air filter box?
Click to expand...

Stuff the hole with filter foam, remove it and clean with other filters.
Had worked for me 5 years now and no mess to tools I carry in the box!
 
1olbull said:
Stuff the hole with filter foam, remove it and clean with other filters.
Had worked for me 5 years now and no mess to tools I carry in the box!
Click to expand...


I've seen your post's re: foam filter in bottom & understand it would work, but it still breathes - I think Norm is going to cause problems by taping the hole shut
 
skydog1000 said:
You will need s2 of this filter K&N 62-1340 Vent Filters. You will need 3 of this filter K&N RU-2780 if you want to change the air filters on your bike. Hope this helps you
Click to expand...

@BigNorm & @skydog1000 So is this the 2nd vent filter connecting to the tappet cover and as my bike was fitted with a RamAir before I bought it will I have a 2nd vent filter too? I thought there was just one that fitted crankcase at rear of engine that used to have a hose to airbox. I'll have to look for it.

Link Removed
 
You must log in or register to reply here.

Similar threads

Bearclaw cutting
2
Replies
18
Views
2K
EasTexRIII
Hi Folks. Need a picture of a 2020 & post R3 with a set of crash bars.
2 3
Replies
26
Views
2K
CvSisinthehouse
Looking for a company that makes easy steer-type triple trees for mounting sidecars
Replies
4
Views
348
dog hauler
My Bearclaw Mod
2 3
Replies
27
Views
4K
vindex1963
A Labor of Love; aka building a Rocket III Speedster
15 16 17
Replies
164
Views
11K
Claviger
Menu
Log in
Register