Helmet noise

Cycle Gear already sells a few of their Bilt branded helmets with Sena Bluetooth built in
 
Glad you like them.

The pads in mine show no sign of wear after a few months of use. I haven't cleaned them yet. Maybe ear cheese preserves them! I will clean them now whilst I remember.
 


These are the best I found, for me. I have been using these for a few years now!
 
I have a difficult time finding earplugs that fit. My ear canals are large but very shallow. The yellow foam ones I posted the picture of are the only ones I've ever found that are large enough in diameter. The ones like pictured in the previous post would touch my eardrum and still fall out.
 

I have no issues with my Arai, except it's hot above 90F.
 
Fred - Is there anywhere near you that molds custom plugs? Basically they place a foam protector in your ear and pump silicone putty in. Better fit impossible.

I have a set that were made for me at the IWA shooting fair in Germany. EAR-Inc (they're a US company) was promo-ing. Thing is they were doing them fast; so were a bit Quick And Chunky in the outer Ear. But they were NOT expensive. The problem with mine is that the part in the outer ear is TOO BIG and can just rub the helmet padding. But it's an option.

Short fat ear canals - I would (if I were you) try a set of the MAN-SIZE Flare Isolates. Aluminium ones. You can always give them to your better half if they don't fit. And if you find the metal part a bit big - they'll easily turn down smaller! - Turning down Titanium ones a bit more awkward.

SIZE GUIDE

 

I'll have to my calipers out and see which size I need ! Does the metal part go far enough into your ear that you don't scrape them out putting your helmet on ?
 
F^ck sounds like you'll need .45s for sure, Steve's a 9mm, and me .22 Short.