ECU is not responding

Foster33

Standard Bore
Joined
Jan 17, 2024
Messages
6
Location
Anna Maria, FL
Ride
2023 Rocket 3 GT
Hey all

Looking for some help with TuneECU on my 2023 Rocket GT.

I have a vLinker MC+ which is under the compatible Bluetooth obd2 scanners. The app successfully connects to the vLinker, but fails to connect to the ECU.

Headlight fuse pulled, ignition On, engine off. I have a valid TuneECU license, and the app is up to date.

Any help/insight will be greatly appreciated.
 
Hey all

Looking for some help with TuneECU on my 2023 Rocket GT.

I have a vLinker MC+ which is under the compatible Bluetooth obd2 scanners. The app successfully connects to the vLinker, but fails to connect to the ECU.

Headlight fuse pulled, ignition On, engine off. I have a valid TuneECU license, and the app is up to date.

Any help/insight will be greatly appreciated.
Does your VIN fall within the TuneEcu recognized numbers? There was a recent post by Penner that some of the '23 models may not be covered yet. But on mine I have to push it out of the metal shop for everything to work right.
 
Does your VIN fall within the TuneEcu recognized numbers?
Yep, it was what Kevin described. Just got finished reprogramming the ECU with Penners map and about to take it for a ride. Also it seems that all VINs are recognized now. There is maps up to a VIN and maps for all vins after.
 
We had issues with this, the run/kill switch had to be in correct position @Nashvegas may be able to remember what/how we set that
If I recall correctly, it was in the down, start position. We figured that out much quicker than the, “you must have the main key fob. The secondary keys will not work.”
 
Back
Top