Day makers for Rocket 3

[juice_man_86]

I have the Funlove lights on my 2015 and unplugged the parking lights and I have zero issues.

 

[instant]

Have the same issue on 09 R3, parking lights are out. High beam LED goes on after say 15min of riding (5min if its hot outside). I will plug parking lights back and see if it helps, right after I return from my travel.

 

[Ishrub]

I bought and installed myself the real day makers Not a Chinese or other knock off, Money talks $ull**** walks. Never have had a problem. Parking light included.

Neither have I or @Claviger , with Chinese 50w Hibeam with great cutoff on hi and lo beam for less than a 1/4 the price of Speaker USA. Angel light ring to be used as either blinkers, strobe or running light in amber or running light or parking light in white. Yeahh, ya get what ya pay for, but ya can pay far less

 

[Pablouk]

I have the exact same issue, isolation via relay fixed it. I have relay that is latched on wen you toggle the high beam. That fixed it.

 

[Pablouk]

This is the kit, I removed the sockets and cut the old headlight looms and soldered them together. EBay item. 360461543240

 

[sonny]

Neither have I or @Claviger , with Chinese 50w Hibeam with great cutoff on hi and lo beam for less than a 1/4 the price of Speaker USA. Angel light ring to be used as either blinkers, strobe or running light in amber or running light or parking light in white. Yeahh, ya get what ya pay for, but ya can pay far less

You can but I would not trade my Daymakers for anything else. Best overall improvement I have made so far.

 

[Pablouk]

The are fantastic I won't go back to Original.

 

[Chkwgn460]

This is the kit, I removed the sockets and cut the old headlight looms and soldered them together. EBay item. 360461543240

The ebay link didn't work. You put the relay on the wires for the brights? Mine has the same problem.

 

[Pablouk]

Just search the number eBay will find it, it was not a link. This is the link

360461543240 | eBay

 

[Pablouk]

It is plug and play, but I cut the loom and removed the plug on new cable and joined it, on the new connection to lights I popped open the connection box removed the wires to pop them through the headlights bowl and then Re fitted the wires as they were. all good, I discarded the half of the original looms that plugged onto the lamps. Soldered the joints and insulated with self amalgamation tape. Job done.