Triumph Quit Ignoring Your Ignition Problems

I had the ignition problem too...I thought i was stranded about 70 miles from home, but i wiggled the wires under the ignition, seen that i could get it powered up, tied the wires to the small metal frame that is under the triple tree and rode home, i then called the dealer and they replaced the ignition and all other lock sets (so i would have the same key for everything....instead of two), no cost to me....well hey i'm out 3 small tie wraps...
 
Until you reroute the lights from going through the ignition switch, it will happen again.
 
Not unless you want to. It simply relieves the ignition module of the high current of the lights. There is a switched option if you want it (good for doing maintenance without draining battery).
 
cardinal93 said:
Not unless you want to. It simply relieves the ignition module of the high current of the lights. There is a switched option if you want it (good for doing maintenance without draining battery).
Click to expand...

I can't imagine why anyone would switch their light off anymore as I think it is against the law and required to have the light on now days. As for service, if you have the EB installed you can just pull the power fuse on the EB Kit. The relays will energize, but no power to the light.
 

I agree. But, do not think installing the EB will absolutely the built in problems of the ignition switches provided by Triumph. Not only do the switches fail from excessive current being routed through the them but also from defective solder joints. The workmanship on the two switches I have had experience with was lacking. I have seen bad solder joints (cold) on the lug contacts inside.
 
I'm glad I saw this thread. When I passed my 07 Classic on to my son I gave him the still in the box Eastern Beaver kit along with Mexican's tutorial on how to install it. I asked him just the other day if he'd done so yet and he had not. I'll be visiting him in Maryland the last two weeks of March so will put it on my "must do" list. IDK lives not far from not far from my son so hopefully he will provide the installation oversight.

And I too cannot understand why Triumph continues on with this defective ignition system when the fix is so easy.
 
You must log in or register to reply here.

Similar threads

No Power When Ignition Turned to On
2
Replies
16
Views
272
kipper
ignition switch issue
3 4 5
Replies
42
Views
2K
Gordy
Starting/Ignition Switch Help
Replies
5
Views
427
IMBatmon68
Ignition gone.
Replies
8
Views
974
thomasbenjamin
Ignition... Fuel injection MAP HICCUP misfire???
2 3 4
Replies
32
Views
3K
Mongler07
Menu
Log in
Register