Well, I got home and started playing with the bike. I tried to start it, and it continued to turn over without firing. When I turned the bike on, I realized the fuel pump wasn't priming. So I swapped out the relays, and it worked fine, so I will be getting new relays tomorrow after work.
It still didn't want to idle once I figured it out, so I used the TuneECU app to take a look at the sensors. I didn't think to take a screenshot or recording of the stats, but the TPS is sitting at 2%, and the idle seems to be set to below 500. Once it's warmed up, it will idle at around 750 and "lope."
I let it run for a few minutes and got up to 180 degrees before I turned it off. But I grabbed, twisted, pulled, moved, and took any other potential action on the wiring harness to see if something bad happened. Nothing showed up or showed issues through any plug I played with or action taken. Tomorrow, I will fix the relays, fill the radiator with water, and work on any other issues that may be a problem while it's running. That is after I work an extra 6 hours on Saturday.