Kevin frazier
Widowmaker!
I stole every idea from guys on the forum just like most things i do to the rocket. Wanted to get that out there. Claviger Warp Spazonr3 Neville. i went with Pingel who evidently uses Shindy out of Japan. Quality as usual from Japan. i ordered some nut zerts (rivets) probably lots of names, those that can just weld a nut that would work also but it just needs to attach in the web im gonna call it, where the plastic cover goes on each side up front under tank. for the end at bars, i went with Nevilles idea to attach to fork tube. Spaz and claviger drilled into bottom yoke, so obviously that works, in roadsters, but Nevilles idea in his picture attached to fork and on mine its just smoother action there and better angle was accomplished. Ofcourse i havent tested yet and am not recommending this is safe or useful. I did it because i can
had to say that but for my application it may help. Heres some pictures

Attachments
-
83C54BB8-973C-4815-9A3F-FAAC3EE98E59.jpeg168.4 KB · Views: 51
-
B277C198-EE86-4AC0-A1EA-97FBC6D5E176.jpeg113.5 KB · Views: 47
-
5C57C979-C383-4C5B-9B59-A1B092164410.jpeg123.4 KB · Views: 49
-
B1780B40-3580-4B04-ADC5-A83E323506AC.jpeg146 KB · Views: 49
-
1A2DD3F6-50B6-4923-8856-0DA7800777DB.jpeg92.4 KB · Views: 48
-
99FBAB83-6E57-4D0C-8333-4DEB25993AC7.jpeg150.9 KB · Views: 49
-
9A2F5DF9-35A2-4AA1-9E59-16D9D7BFB5BF.jpeg165.4 KB · Views: 49
-
E1F24FB6-C55E-49DB-994F-D4137EB56808.jpeg169.4 KB · Views: 46
-
EE726980-919C-4CD1-84D8-1C36DAB2C096.jpeg151.3 KB · Views: 49
-
908456C4-F5F4-4F7A-B682-D52C6BB0A129.jpeg105 KB · Views: 50