Roadster Fog Lamps

[Dawg68]

Before I take the tools to my triumph roadster fog lamps, has anyone ever changed the bulbs? If so do you know what type they are?

Thanks

 

[barbagris]

They are bog standard H3 bulbs - BUT the power wire (white) has had the spade connector removed and is soldered into the longer wires that run back under the tank. It makes what should be a 5minute job into a 30 minute one - or a nightmare if you don't have the tools.

 

[Dawg68]

Outstanding.....I figured you'd have the answer. I am thinking of pulling the bulbs and upgrading them.....if I can find a replacement. I upgraded my headlamps and now the fog lamps look pathetic.
Once again thanks for the response barbagris.

 

[barbagris]

Outstanding.....I figured you'd have the answer. I am thinking of pulling the bulbs and upgrading them.....if I can find a replacement. I upgraded my headlamps and now the fog lamps look pathetic.
Once again thanks for the response barbagris.

With access to decent machine tools and a bit of ingenuity - Conversion to LED is do-able. Mine are. To get the best benefit you do need to machine the insides though. A rough and ready conversion takes less time and is reversible - but the gains are less visible.

 

[Dawg68]

Thanks, which led bulbs did you use?

 

[barbagris]

Thanks, which led bulbs did you use?

I made them!

 

[Dawg68]

understood, thanks

 

[Al Carter]

When you reassemble the fog lights make sure you seal the joints with grease and the screws with silicone sealant.

Mine had filled with water, but then it does rain a lot here in England

 

[warp9.9]

I really like the fog lams for the Rocket but the brakets cannot handle high speeds. They suffer from stress fractures ofter a short while. At regular road speeds they hold up well and give great visability.

 

[1olbull]

Warpo,
So I shall remove them before going 150+ mph
NOT!