Oil Tank O rings leaks

Okay BigNorm, here you go

It feels funny like a new waterski. Dead centre, ok lean right or left, ok slow starting right or left turn, funny. Past 50 mph, feels fine.
I'm !@ 34 psi... Is this a tire pressure issue? Does it go away? Looks bad ass, sounds bad ass, pulls bad ass.
With out a windshield, you better hang on.

Question for the group... Who has the best Triumph service garage in Texas?
 
Last edited:
I run mine at 32 psi. Started out at 38 Psi and dropped down as recommended by Hanso I believe.
 
OK! 30psi and Gasoliiine

I see nobody wants to take on the Who is has the best service shop in Texas?

Does the front engine case need removing to adjust the valves? It does not look like it.
 
Last edited:
I've had good experience just putting the max psi the sidewall recommends. Live and learn I guess.
 
1K9 said:
Does the front engine case need removing to adjust the valves? It does not look like it.
Click to expand...

No the clutch cover/front engine cover does not need to come off to check or adjust the valves. Now if you do you should look closely at the cam chain guide on the tensioner side. If yours has not had the update kit then the guide should be updated. Otherwise IMHO run with the one you have.
 
You must log in or register to reply here.

Similar threads

Chain guide oil pump
Replies
0
Views
461
bebsy
Chain guide oil pump
Replies
2
Views
1K
bebsy
Resource Download Power-Tripp-2013-ECU-Retune-R3T stock or slip-on.hex
Replies
1
Views
207
Junior
Anyone ever heard of this?
Replies
4
Views
406
Bob R
2.5 oil filter part #
Replies
8
Views
2K
Kojack1970
Menu
Log in
Register