Einar
.060 Over
- Joined
- Jan 14, 2024
- Messages
- 170
- Location
- Los Estados Unidos
- Ride
- '24 Rocket 3 GT & '23 Tiger 1200 GT Pro
Just did a change this past weekend. I checked the level cold and it was about 25mm above the max mark (that's cold without doing the "start-and-run-then-wait-then-check" procedure). I know that with the proper procedure it was halfway between the low and high marks--something like 50mm difference(?) IIRC.
I then drained cold and 4.8 liters came out, including the oil that drained from the filter--that's just 0.4 shy of a dry fill. Pre-filled the new filter, added 4.6 per the manual, did the procedure, oil was at the low mark. Added another ~0.3 and it was in the middle again.
I then drained cold and 4.8 liters came out, including the oil that drained from the filter--that's just 0.4 shy of a dry fill. Pre-filled the new filter, added 4.6 per the manual, did the procedure, oil was at the low mark. Added another ~0.3 and it was in the middle again.