New Rocket X Vance & Hines 4" Pro Pipe

[Brenna1960]

Make a video so we can hear what it sounds like.

I will make one in a week or so, but it pretty much sounds like the one the guy on E-bay who has been selling them for $350 dollars and just raised his price to $410 or so. He has the sound bite on the add.

 

[Jabol]

Oh ok I submit, I submit,what is this boot camp? Your not allowed to say anything to an obvious stupid ****, pretty easy to tell just by other comments about your dumb ass. Now go find another post to put negative **** on and quit being so miserable in life, you found the wrong newbie....you won't get the last word!

Brenna, ain't worth the headache, the guy won't change and its just gonna be ongoing back and forth BS. Nice ride BTW, make it how you like it!

 

[mully95]

Like a friend of mine says about miserable old men .... "He's a ******y old bastard"

 

[Corey]

Looks great but How does she sound???

 

[1olbull]

An interesting muffler option I have not heard of before.

 

[Boog]

I changed the sound of my R3T as well by adding the TORs. One big factor for me was they look just like the OEM cans and I like that look a lot.
Looking at the R3X with its particular style, I do not feel the chrome works at all with half an exhaust black. I am sure the sound is going to be an improvement and still not as loud as the V-Twin thump, I just prefer the look to be more symmetrical; either all black or all chrome.
I do like the look of the diameter and the end cap, that size does work with the bike.
Regardless of my opinion, we all go our own way and we all love our bikes and do what we can to make them meet our desires. Waiting to hear it now...

 

[MickyB]

Love the look of the X and the pipe looks great as well. Good buy. Oh, and welcome.

 

[140cubicinches]

This was not as easy as I thought it was going to be to put on. Hardest part was to get from the header pipe to the muffler, had to make 2 90 degree bends to get it to line up, just welded together 2 pieces of pipes that I had laying around from old exhaust from my Harley's. Had to lengthen and weld on the horizontal piece where the muffler mounts. I was lucky in that my friends at the Harley shop had this pipe as I know they are bad ass on all the high HP builds on a Harley (is there such a thing in comparison to this beast? LOL) anyway, this was a brand new pipe that apparently had a very few superficial scratches on it and a customer wanted it removed so I picked it up for a good price and wanted to make sure it would work before I did anything to it. The bike does have some chrome on it so I figured it would look ok if I decided not to ceramic coat it black, so don't fret CanberraR3 you winey ass legend in your own mind ( just my opinion ) even if you aren't, I would comment anyway LOL!! I probably will have it done in black. It really changed the way it runs, it has a pretty good (hunt) or serge at idle now and has the popping at deceleration. I took it and had the factory stage 1 download installed yesterday but it still does it, but at least I know it is getting more fuel. This is such a high flowing pipe it doesn't have hardly any back pressure at all and it does sound really good on the Triumph too. Not real annoying (like CanberraR3) !!! When I was at the dealer yesterday after the download was installed and it was still Hunting the service manager took one of the square absorbent pads (for soaking up oil on the ground) and folded it up and started gradually covering the end of the exhaust pipe....for more pressure, and the Hunting went away then as soon as he would remove it it would start again, we did this a couple three times to make sure. So basically he said if it didn't bother me too much to run with it as long as it is running fine when going down the road and until I get my Ramair and either a PCV with auto tune or a Doebeck with the auto tune.

I found this pipe in my stock room and we did two bend a the mufflers shop we did a good job

I need to keep my 3 TORS to fit on my this Winter after ceramics coated them