My Moto Hobo life

[Ishrub]

It is #27 on this version of parts for VINS BEFORE > Eng No 369112​

#26 is clutch plates.

Harbour City Motorcycles - Rocket III, Classic & Roadster 0 - Clutch

Browse OEM Parts for Triumph Rocket III, Classic & Roadster 0 Clutch

www.hcmc.com.au

​

​

T3550236 - T3 WASHER 14.0X20.0X1.​

• Reference​

  27

• Part Number​

  T3550236

• Description​

  T3 WASHER 14.0X20.0X1.

• Notes​

  > Eng No 369112

• Price​

  4.60

• Qty On Diagram​

  1

T1170029 - T3 LIFTER PIECECLUTCH​

• Reference​

  24

• Part Number​

  T1170029

• Description​

  T3 LIFTER PIECECLUTCH

• Notes​

  > Eng no 249177

• Price​

  109.35

• Qty On Diagram​

  1

T1170203 - T3 LIFTER PIECE CLUTCH​

• Reference​

  24

• Part Number​

  T1170203

• Description​

  T3 LIFTER PIECE CLUTCH

• Notes​

  Eng no 249178 >

• Price​

  103.00

• Qty On Diagram​

  1

 

[Gerald]

I'll have to check, seemed like I read to disregard with new style p.p.

Looked on Hermy's parts break down, washer item 27 # T3550236 not required with lifter piece # T1170159 or T1172023 due to 4.1mm shoulder width

 

[Ishrub]

@Gerald you may have seen a version of this below.​

I have no explanation...... just googlefoo! ​

​

Harbour City Motorcycles - ROCKET III, CLASSIC & ROADSTER 0 - Clutch

Browse OEM Parts for Triumph ROCKET III, CLASSIC & ROADSTER 0 Clutch

www.hcmc.com.au

​

T3550236 - T3 WASHER 14.0X20.0X1.​

• Reference​

  27

• Part Number​

  T3550236

• Description​

  T3 WASHER 14.0X20.0X1.

• Notes​

  > Eng No 369111; Fitted with T1170029, T1170057 & T1170059 (issue1). NOT required with T1170059 (iss

• Price​

  4.60

 

[Ishrub]

Looked on Hermy's parts break down, washer item 27 # T3550236 not required with lifter piece # T1170159 or T1172023 due to 4.1mm shoulder width

Clutch. 2018 Triumph Rocket III CLASSIC & ROADSTER | HERMYS TRIUMPH eSTORE, Port Clinton PA

2018 Triumph Rocket III CLASSIC & ROADSTER Clutch

www.triumphestore.com

27
Washer, 14 x 20 x 1.6
> Eng No 369111; Fitted with T1170029, T1170057 & T1170059 (issue1). NOT required with T1170059 (issue 2), T1170159 or T1172023 lifter pieces dut to 4.1mm shoulder width

Weirdly at Hermy's and the 2nd version from Aussie dealer Harbour City their images have #26 with a slightly different group of plates

 

[TURBO200R4]

It is nice to see all of u guys working your brains trying to help us out. We appreciate the help and thank u all.
My plan A on this is to play with it and try to come up with an end play clearance. If that works we will know what can be added. To many washers and it will lock to the turning clutch pack/drum.

 

[tribal]

Just found a used chain/sprocket set on Ebay - let me look closer...

 

[TURBO200R4]

It is nice to see all of u guys working your brains trying to help us out. We appreciate the help and thank u all.
My plan A on this is to play with it and try to come up with an end play clearance. If that works we will know what can be added. To many washers and it will lock to the turning clutch pack/drum.

my theory/guess is the the lifter is a tight fit in the roller bearing if anybody knows? if it fits tight then there is no need for washers.
if not then i will find out when parts arrive.

 

[wjb]

"Pre-Enjoyed"? Do you mean one that has not been previously defiled by enjoyment?

 

[warp9.9]

I too use the washer and the wave washer, maybe its like the detent springs some toss, dunno but i use like parts fiche says

The wavey washer has been in the clutch on all models. The large flat washer which is actually a thrust washer for the torrington needle bearing. If you leave that out the needle's on the thrust bearing would eat the aluminum seating face on the pressure plate. The book shows the flat torrington (oringinal design) and never was updated as the clutch design got updated.

 

[warp9.9]

Just found a used chain/sprocket set on Ebay - let me look closer...

I got to ask why did you need a new pump chain and drive gear? I might have missed that part