Looking for a good starting point tune please

[chomas]

I've been searching through the forums and haven't found one for my setup. If there is one and I missed it, my apologies.

-I have a 2014 Triumph Rocket III Roadster.
-Ramair filter
-Carpenter Racing exhaust - Sometimes I put a Samson A-161 baffle in it. It depends whether I'm mad at my neighbors or not
-PCV with an AT.

Thank you very much,

 

[1olbull]

IF you can - find a tuner that knows Tune ECU and get a proper dyno?

 

[dougl]

I've been searching through the forums and haven't found one for my setup. If there is one and I missed it, my apologies.

-I have a 2014 Triumph Rocket III Roadster.
-Ramair filter
-Carpenter Racing exhaust - Sometimes I put a Samson A-161 baffle in it. It depends whether I'm mad at my neighbors or not
-PCV with an AT.

Thank you very much,

Open up the secondaries with tuneecu, then let your autotune do its thing. If that doesn't work, get a dyno tune on your PCV. Where do you live?

 

[dougl]

IF you can - find a tuner that knows Tune ECU and get a proper dyno?

That could be impractical since there's maybe one person west of the Mississippi who can do it.

 

[chomas]

That could be impractical since there's maybe one person west of the Mississippi who can do it.

I live in Michigan

 

[dougl]

You

I live in Michigan

So you're half way between Carpenter Racing (who uses Tuneboy) in NJ and Nels (who does TuneECU) in WA.

 

[chomas]

You
So you're half way between Carpenter Racing (who uses Tuneboy) in NJ and Nels (who does TuneECU) in WA.

Can I just load for example Caligers CES+Ramair tune (should be close to what I have) with tuneecu and use that as a base then let the AT do it's thing? Or will the PCV have a problem with the Tuneecu base tune?
Or maybe just take the PCV and AT out and just run that above Caligers tune?

 

[dougl]

Can I just load for example Caligers CES+Ramair tune (should be close to what I have) with tuneecu and use that as a base then let the AT do it's thing? Or will the PCV have a problem with the Tuneecu base tune?
Or maybe just take the PCV and AT out and just run that above Caligers tune?

I don't know what Claviger's tune is. Does he have the CES+Ramair? I'd like to see that tune. Could you PM me? It should be at least as rich in the F tables as PowerTrippJardine3K&N. If so, and the secondaries are open, that would be a good place to start. Do you have anything in the PCV now? It would be interesting to see what trims the autotune comes up with on top of a tune for CES+Ramair.

 

[chomas]

I don't know what Claviger's tune is. Does he have the CES+Ramair? I'd like to see that tune. Could you PM me? It should be at least as rich in the F tables as PowerTrippJardine3K&N. If so, and the secondaries are open, that would be a good place to start. Do you have anything in the PCV now? It would be interesting to see what trims the autotune comes up with on top of a tune for CES+Ramair.

He has one on this post I believe. Like third tune down. You can see at the top where he has said he updated that particular CES Ramair tune November 9th 2015

Tune for a stock R3 (Developed on a Roadster) | R3Owners

 

[warp9.9]

You will have to make up your mind on whether your going with a baffle or not before you tune or auto tune. Most likely there is to much difference in the flow between the two.