LED Headlights

[Jvheli]

I have a 2016 Roadster and was curious if anyone has tried these from Optix?
Optix 5.75 5-3/4" 40W CREE LED Black Projector Headlight w DRL Harley Davidson

I had Daymakers on my Roadglide and just can't take the low output of standard bulbs.

I have seen people using JW speaker and Harley on the Rocket (made by JW SPEAKER) but these are much less expensive.

Unless I hear they won't work, I'm gonna give them a try.

 

[EasTexRIII]

Go for it. Others on this forum are using the Chinese knock offs with no problem.

The brand you are choosing on ebay may be a crap shoot, dunno.
I'm using these since Feb w/o any problems, made by Genssi:

Black 5.75 5 3/4 Motorcycle Projector LED Light Bulb Headlight For Harley Day

 

[Robm422]

I'm using knockoffs from ebay and they work great, super bright!
Only problem was they wouldn't work with the inner ring inside the headlight assembly. I ended up using weather seal foam from home depot instead, worked like a charm.

 

[EasTexRIII]

I'm using knockoffs from ebay and they work great, super bright!
Only problem was they wouldn't work with the inner ring inside the headlight assembly. I ended up using weather seal foam from home depot instead, worked like a charm.

That's probably a good idea...... I'm OCD so I took a dremmel rotary stone to the I.D. of the ring (took a long arse farkin time too)

 

[Claviger]

Love my Honk Kong LED headlights, not a single bad thing to day about them.

 

[WyldCFH]

I'm using these with the stock ring, no modifications needed.

 

[Jvheli]

I'm using these with the stock ring, no modifications needed.

The link doesn't show the brand.. Which ones?

 

[EasTexRIII]

The link doesn't show the brand.. Which ones?

 

[Jvheli]

Thank you! Just bought 4 for wifeys and my Rocket! Thanks for the input, as I've heard some don't fit right.

 

[EasTexRIII]

Thank you! Just bought 4 for wifeys and my Rocket! Thanks for the input, as I've heard some don't fit right.

Yea, That's great @WyldCFH found some that are not to thick & will fit the inner fitting ring