I introduce you the AIR-Claw

[Ishrub]

Been trying to find it for he last 10 min but no success. I am sure he said he was a member.

Seems I was wrong after checking all my emails from him he only spoke of all his R3 Facebook groups he runs or contributes too.

 

[Steel]

Seems I was wrong after checking all my emails from him he only spoke of all his R3 Facebook groups he runs or contributes too.

He had 3 FB R3 groups.

 

[barbagris]

Great bloke to deal with.

Good to know - and the email helps

 

[1olbull]

Yep they have been posted previously and made by David Gill davidx90@hotmail.co.uk a forum member who does a number of R3 custom parts etc. and he has his own website where things are cheaper and he responds to email real fast Rocke's Patches.Welcome to Rocke's Patches - Rocke's Patches

If things are not available on eBay website try the Rocke's Patches one and go to pull down menus for R3 body parts Plastic and Metal. Some listings on eBay may indicate not available to some countries but he will usually send and even combine eBay and Rocke's Patches items in much reduced combined shipping. Great bloke to deal with.

That there explains why a few days back I received a couple cool looking patches with my XL Fly order!

 

[EasTexRIII]

Yea, even tho I don't do Facebook, I've ordered from him off of Facebook. He's a stand up guy

 

[Ishrub]

That there explains why a few days back I received a couple cool looking patches with my XL Fly order!

So as it is a 20 minute job to fit how do you like it so far?

 

[1olbull]

So as it is a 20 minute job to fit how do you like it so far?

Interesting question!
The package arrived destroyed - ripped open in several places.
The mounting kit (screws,nuts collets and washers) were missing - in lower center of pix.
Surprisingly, the XL Fly and two brackets arrived in good condition!
I've made contact with "toyota6510" and he is shipping me a new mounting set.

 

[Ishrub]

Are you referring to your new black fly brackets in quote from another thread below?
Take care fitting them as they are "powder coated black" not black chrome and the OEM chrome bolts will scratch them around the mounting holes when fitting/tightening to the fork fixing kit clamps - maybe try a nylon or black rubber washer there too. Only the kit screws to mount the flyscreen to the fly brackets are hardened black chrome. I thought the screen edge needed to be covered with a moulding strip too as the raw edge is right in your face once fitted.

You have chrome fly brackets?
Too bad we are so far apart as I have a new set of black chrome that I wish were chrome chrome!

 

[barbagris]

TRYING to wrap a mesh cover over the filter itself. Watch this ---------> <------- space.

Will be using M3 stainless screws thread-locked into the Aluminum Filter base - screwed in from the outside - so they cannot get sucked in. Mr eBay is sending the screws. Well it's señor eBay so forget mañana.

 

[ChicagoRocket]

Finally finished my AIR-Claw and finished my mods til Australian spring! Now let's ride

the Winter

Can you make me one mate? How much would you charge?