Hi Folks. Need a picture of a 2020 & post R3 with a set of crash bars.

[ogalarra]

I've got two sets here available I can Airpost for about US$35 if you like.
One set is used but unmarked I think, ( I will have to check )Au$125 approx (US$80) + postage;
The other set is new in shop worn packaging Au$160 (US$105+ postage).

If interested I will take photos.

Hi! I have a Rocket 3 Storm R 2025....do you think this will fit?

 

[ogalarra]

Hi There The piece you are referring to is to takes a 17mm socket to undo the frame nut on the left-hand side so you do not have to take the tank and airbox off to fix the bars I WILL TRY TO SEND YOU A VIDEO OF THE FITTING INSTICTIONS
Kind Regards Mark

That will be great!

 

[Triumph Rocket 3]

I need the picture for a couple of reasons. First To make sure that there are such things. Second to see how they are mounted. The people I am writing say no instructions.
Thanks in advance.
Russ in OKC

Hi There There is photos of my R3 Gt with the fitted crash bars on page 2 of this forum The spanner with the square on one end is to take a 17mm socket with 10mm drive so you do not have to take the air box off The fitting on the right hand side is a Torx 50 You no not need to put a jack under the motor as there is another bolt holding the motor to the frame They are easy to fit Hope this helps you
Kind Regards
Mark

 

[ogalarra]

I emailed the company and there is no engine protection aka crash bars for the 2024/2025 Triumph Rocket 3 Storm R

 

[Triumph Rocket 3]

That will be great!

there is no instructions but mine fitted ok Do the right hand side first by taking out the long bolt that goes though the frame The nut size on the left hand side is 17mm You do not have to put a jack under the motor as there is other bolts that hold the motor to the frame

I emailed the company and there is no engine protection aka crash bars for the 2024/2025 Triumph Rocket 3 Storm R

That is correct The crash bars for sale at the moment only fit 2020/2023 Triumph Rocket 3 GT but new crash bars for your model wont be long before they are on the market
When i know more i will keep in touch
Kind Regards
Mark

 

[ogalarra]

there is no instructions but mine fitted ok Do the right hand side first by taking out the long bolt that goes though the frame The nut size on the left hand side is 17mm You do not have to put a jack under the motor as there is other bolts that hold the motor to the frame

That is correct The crash bars for sale at the moment only fit 2020/2023 Triumph Rocket 3 GT but new crash bars for your model wont be long before they are on the market
When i know more i will keep in touch
Kind Regards
Mark

Thanks a lot Mark!!!

 

[CvSisinthehouse]

Will the engine guards still fit a GT if the footpegs are in the forward most position? Thanks