Gipro wiring

[Cruzn6]

Can anyone recommend a good switched hot wire to connect the Gipro to on the R3T, so it's not pulling power from the battery when the bike is off?......thanks in advance....Larry P.

 

[Medic]

I can tell you from my experience this winter that the GiPro doesn't pull any noticeable amount of power. I put my bike in the shed for a few months this winter only to realize two days ago that I didn't plug in the trickle charger. The bike fired right up, no problem with GiPro, PCV and all. Hope this helps.

 

[rolandrat]

gipro

surely if you switched it you would have to re-programme it every time you turn it on .memory would be lost when switching off.

 

[RKTBOB]

minimal power drain ..hook it up as suggested..none of us have had problems with dircet to the battery..I agree that re-programming may be necessary with on.off hook up.

 

[Cruzn6]

Thank you all for your reply's.....I will heed your advice and go direct to the battery.......Larry