Changed tune, now my gauge goes straight to the full mark and sticks like velcro. I unplugged it earlier and it started just going crazy, then finally settled down and began working properly again, turned the bike off and let it set for awhile, decided to look again and sure enough, turned the key, flipped the switch, guage is back on the full mark again. Tryed going back to stock map but nothing changed so I reloaded 20220 and started probing for voltage. TuneECU was showing 1.83V from SU and I was getting no reading at the plug for the gauge. Couldnt probe the plug going into the tank.