Free unrestricted maps for Rocket R GT and TFC now online

[gadget_ho]

Hey Tal, I'm not sure I understand what you're saying about the ignition switch- let me know. Thanks!

The bike needs to be in the RUN position, not the Power ON/OFF position for the engine systems to be online.

From the manual:
"The Power ON/OFF position switches the electrical circuits and the instrument display between on or off. This allows access to the instrument display without starting the engine."
To talk to the ECU it needs to be in RUN...

 

[Tal]

The bike needs to be in the RUN position, not the Power ON/OFF position for the engine systems to be online.

From the manual:
"The Power ON/OFF position switches the electrical circuits and the instrument display between on or off. This allows access to the instrument display without starting the engine."
To talk to the ECU it needs to be in RUN...

...like he said...

 

[Journeyman]

yep...i pushed the switch all the way away to the top position which gets the gauges working right? but you need to bring it back down to the position just before ignition which is then 'on'.....it caught me out for a few minutes but then i am from way down here in the deep south!...you wont have this problem...lol

I'm down in our version of the deep south here too- thanks, I might have done the same thing!

 

[STUGT3]

Anxious to see how you like it. I have same exhaust and about to load a tune myself.

The weather gods have been nice at last, finally got out for a blast today i have to say thank you Mr penner your tune has woken the beast i can't believe how much smoother it is and when you twist the throttle make sure your holding on. The werkes exhaust is loud especially when in traffic but out on the highway just gives a nice growl decel pop is just louder than standard system, definitely worth $ spent

 

[Journeyman]

OK- gonna need some help here fast. Did everything correctly (I assume). At the very end it said it failed! Then mentioned turning off ignition 5 secs. Then said Run ECU recovery. I said yes. Then map came up again on TuneECU and I assume everything is OK. Try to start- nothing! Powers up, but starter button doesn't do anything. I can connect with TuneECU, but there is no option to reload a map. F^CK'n Hell! Please Advise.

 

[Journeyman]

Disconnected battery. Came back tried again. Now it's doing a recovery (fingers crossed).

 

[Planet3]

Disconnected battery. Came back tried again. Now it's doing a recovery (fingers crossed).

Keep us updated.
Did it all turn out ok?
One can only assume voltage drop

 

[Journeyman]

Keep us updated.
Did it all turn out ok?
One can only assume voltage drop

It failed. Trying different battery charger- showing 13.9 volts.

Does the map have to be in the TuneECU Map folder? It's in my downloads folder, but I navigated to it. I'm not used to Androids and can't figure out how to move the file. I select it, choose Move, but no dialog that lets me direct it to that folder.

I also downloaded through the app but the Map folder is empty. Is this even the Penner file, or is that the stock file? This shows when I navigate to the download of his file and choose Open.

 

[Planet3]

It failed. Trying different battery charger- showing 13.9 volts.

Does the map have to be in the TuneECU Map folder? It's in my downloads folder, but I navigated to it. I'm not used to Androids and can't figure out how to move the file. I select it, choose Move, but no dialog that lets me direct it to that folder.

I also downloaded through the app but the Map folder is empty. Is this even the Penner file, or is that the stock file? This shows when I navigate to the download of his file and choose Open.

I see 2 options in tuneecu. Download the map through the app, or have the map in your Android phone folder beforehand and choose the subfolder within your phone. If it starts the flashing process, then the map must be the right one otherwise it would show invalid map.
Your photo at 17 minutes but 0 % is a concern

 

[Journeyman]

I see 2 options in tuneecu. Download the map through the app, or have the map in your Android phone folder beforehand and choose the subfolder within your phone. If it starts the flashing process, then the map must be the right one otherwise it would show invalid map.
Your photo at 17 minutes but 0 % is a concern

That was when I first started. It went all the way then said it failed and my troubles began. Hoping more juice is the solution.

*Is that the Penner map or stock showing on the screen? I remember someone else reloaded the stock map by mistake.

Failed again- trying jumper from car battery (not running).