Engine dresser bars

[Stillserving]

When you work out the exchange rate from € and add the shipping you save £6. For the sake of £6 I'd rather buy from a seller I know and trust, the lads at the sales counter in the warehouse are really helpful. I know from experience that if I don't like a product I can return it for a full credit even if they have had to order it in. Mentioning the name of the parts supplier I often use was meant as a recomendation too, so not just a product recommendation but a trusted supplier to obtain from too

I like to support businesses that support their customers , but when I looked at your guys website, it says they don't shop to the US.

 

[DaRiz]

I put the Triumph model on mine awhile back.
The left side and rear pannier saved the bike as I slid 50’ when an idjit came across 5 lanes and knocked me off.
Put the rear guards on afterwards. They look good and I know they work in a ‘crunch’

 

[RKrodle]

What is the favourite or best - in your opinion - front dresser bar. Looking for chrome - any advice welcome.

I just bought these off of Amazon. They are 1 1/4"

 

[CrzystghndKC]

I just bought these off of Amazon. They are 1 1/4"

Send em back those are the old style bendy ones. The problem is the steel where the bars attach is too thin. If going to put hiway pegs on just putting your feet on them bends the bars clear to the radiator. Triumph redesigned the bars and beefed up the steel.

 

[CrzystghndKC]

Send em back those are the old style bendy ones. The problem is the steel where the bars attach is too thin. If going to put hiway pegs on just putting your feet on them bends the bars clear to the radiator. Triumph redesigned the bars and beefed up the steel. Notice the top bracket.

 

[RKrodle]

I walked out to my bike just now and placed my foot on the bars and pressed toward the radiator and they did not bend, and I'm a fair sized guy. I just installed them yesterday and will report back if I have any problems, but as of now I'm happy with them.

 

[CrzystghndKC]

I walked out to my bike just now and placed my foot on the bars and pressed toward the radiator and they did not bend, and I'm a fair sized guy. I just installed them yesterday and will report back if I have any problems, but as of now I'm happy with them.

Well I have a set that I am replacing with some Craftride bars the first day it hits over 50 degrees. I would gladly give anyone my old ones. Still in good shape.

 

[JohnsoD]

Well I have a set that I am replacing with some Craftride bars the first day it hits over 50 degrees. I would gladly give anyone my old ones. Still in good shape.

Do you happen to have a picture of these bars mounted? I would be interested.

 

[CrzystghndKC]

Do you happen to have a picture of these bars mounted? I would be interested.

Here ya go. Sorry for the glare the bikes just too shiney.

 

[Landstar]

It looks like the Craft Ride would work with forward controls. Any comments, all will be appreciated.