CES Exhaust and Headers

[cadconversions]

Love it! Making it hard to hold on to my money!

 

[Mittzy]

Thanks mate, the pictures do not do them any justice the first heat shield is a shorter one the second goes from near the top all the way to the bottom and finishes just about were the 3rd pipe is at the same hight as the 2nd and then there is one that goes over the collector and back down to nearly were the exhaust will bolt on. So I shouldn't have any problems with heat even when I am using the highway pegs.
I am extremely happy with them.

I was talking with Trev and Duncan at CES yesterday ( Duncan made the heat shields) they are very happy with how they turned out.

 

[Mike188]

Look very nice, making me wish I had of gone with the shields also.............oh well never mind

 

[TOMCAT]

Looks like a great job .. going to let us know how much the system cost you Pete.

 

[flyreels]

Looks like a great job .. going to let us know how much the system cost you Pete.

Sure mate it was $2684. Delivered to my door, (postage was about $60 ) but I know as I was talking about the design with Trevor ( I sent up a drawing of what I wanted, I used their collector design just got them to make a longer tail on it) and as Mittzy said Duncan made up the heat shields and I know that talking with Trevor that a lot more time went into them than they initially thought. The heat shields are also polished ceramic coated.
Both Leslie and Trevor were fantastic to talk to and they bend over backwards to help you with anything. I can't say enough about how good their service was.
So for the Americans it's a great time to buy with our dollar low it would be $1880 that's everything headers,
2 1/4 inch exhaust and heat shields and postage wouldn't be much more
Cheers Pete

 

[Mike188]

Both Leslie and Trevor were fantastic to talk to and they bend over backwards to help you with anything. I can't say enough about how good their service was.

Cheers Pete

+1
yea very easy to talk to, get what you want and fully explained

 

[1olbull]

Sure mate it was $2684. Delivered to my door, (postage was about $60 ) but I know as I was talking about the design with Trevor ( I sent up a drawing of what I wanted, I used their collector design just got them to make a longer tail on it) and as Mittzy said Duncan made up the heat shields and I know that talking with Trevor that a lot more time went into them than they initially thought. The heat shields are also polished ceramic coated.
Both Leslie and Trevor were fantastic to talk to and they bend over backwards to help you with anything. I can't say enough about how good their service was.
So for the Americans it's a great time to buy with our dollar low it would be $1880 that's everything headers,
2 1/4 inch exhaust and heat shields and postage wouldn't be much more
Cheers Pete

WOW!! that's $1930 USD, about $75 less than I pain before the heat shields were available!!!
Thinking I may buy a new set and sell mine at the TC price!?

 

[1olbull]

BTW -
Here is the response I received from Leslie today regards to polishing the ceramic.

CES Racing
8:36 PM (1 hour ago)

to me

Hi Steve,

Just use a fine mag wheel polish (over here we use a made in USA product called “Purple” Metal Polish (brand California Custom Products ) Purple both in brand and colour. It has to be very fine – not coarse.

Works very well for cleaning up all the coated headers. Comes in Plastic 12 fl. Oz. (355 ml) small bottle.

This same coating -over the years we have seen track race car headers (after about 8 + years..hard racing/nearing the end of their life) just get re-coated. It can add further longevity to product/makes them look new again .

We are just going into Spring over here, no doubt all the bike riders are looking forward to a great summer of riding. (In Queensland it’s so hot anyway during the winter days even, good all year around).

Happy to help.

Regards

Leslie (for)

Trevor Campbell

CUSTOM EXHAUST SPECIALISTS

(07) 32002333 ph (07) 32002344 fax

Web: www.cesracing.com.au

Email: cesracing@bigpond.com.au

 

[Mike188]

BTW -
Here is the response I received from Leslie today regards to polishing the ceramic.

CES Racing
8:36 PM (1 hour ago)

to me

Hi Steve,

Just use a fine mag wheel polish (over here we use a made in USA product called “Purple” Metal Polish (brand California Custom Products ) Purple both in brand and colour. It has to be very fine – not coarse.

Works very well for cleaning up all the coated headers. Comes in Plastic 12 fl. Oz. (355 ml) small bottle.

This same coating -over the years we have seen track race car headers (after about 8 + years..hard racing/nearing the end of their life) just get re-coated. It can add further longevity to product/makes them look new again .

We are just going into Spring over here, no doubt all the bike riders are looking forward to a great summer of riding. (In Queensland it’s so hot anyway during the winter days even, good all year around).

Happy to help.

Regards

Leslie (for)

Trevor Campbell

CUSTOM EXHAUST SPECIALISTS

(07) 32002333 ph (07) 32002344 fax

Web: www.cesracing.com.au

Email: cesracing@bigpond.com.au

Thanks for that Steve

 

[zman8537]

My CES Headers and a 2 1/4 inch single exhaust with custom heat shields, I will try and get some better pictures tomorrow

Does this exhaust have baffles or packing in it??? I was leaning towards the Carpenter Racing Sidewinder exhaust system, but if this has baffles or packing in it this might be a better choice as I will need to install baffles or something in the Carpenters I believe. I am a little concerned about the carpenters and getting burnt too. Any input???