warp9.9
Pocałuj mnie w dupę
I drilled the megaphone and bolted it on. I used a part of the freedom baffle look at the post on the top of the page you will see the original baffle and the part I am using.
Steel
Resident Coonass
- Joined
- Nov 17, 2012
- Messages
- 7,849
- Location
- Cut Off, Louisiana USA
- Ride
- 2012 Roadster & 2006 Classic
I drilled 3 holes to mount the end cap to the megaphone. I went without a baffle.
Good fun lining up those holes, innit??????
warp9.9
Pocałuj mnie w dupę
Its all about proper layout Ruzzle
...and little chainsaw files to "adjust" the holes a tad.................
If only they supplied a box of the right holes with the end caps, there wouldn't be a problem....
If only they supplied a box of the right holes with the end caps, there wouldn't be a problem....
Steel
Resident Coonass
- Joined
- Nov 17, 2012
- Messages
- 7,849
- Location
- Cut Off, Louisiana USA
- Ride
- 2012 Roadster & 2006 Classic
I had to adjust the holes too.
Pres10
Turbocharged
Steel, How do you like the sound and new performance?
Steel
Resident Coonass
- Joined
- Nov 17, 2012
- Messages
- 7,849
- Location
- Cut Off, Louisiana USA
- Ride
- 2012 Roadster & 2006 Classic
I like the sound. A little louder than the drilled out pipes at idle, and pretty loud when you crank on it. No louder than a HD with open pipes.
It feels much stronger now. It pulls so much faster all the way to redline. I doesn't choke at the top of the rpm range like with stock headers. Hopefully I'll have a dyno sheet to post before the weekend.
It feels much stronger now. It pulls so much faster all the way to redline. I doesn't choke at the top of the rpm range like with stock headers. Hopefully I'll have a dyno sheet to post before the weekend.
Pres10
Turbocharged
Is the tune one that Carpenter sent or a dyno tune on your bike?
Is the low end still good?
I intended to do a full 240 kit this winter but I really f'd up my shoulder in November. Hope to be ready to at least ride by April. At this point I couldn't even hold on to stock power. If I feel up to it later this summer I may go ahead and get Carpenters exhaust and be ready for the 240 kit next winter.
I have heard Scott's exhaust and it sounds great. I'm thinking stock compression with no boost might be a tad quieter.
I'm sure that you are going to enjoy it.
Is the low end still good?
I intended to do a full 240 kit this winter but I really f'd up my shoulder in November. Hope to be ready to at least ride by April. At this point I couldn't even hold on to stock power. If I feel up to it later this summer I may go ahead and get Carpenters exhaust and be ready for the 240 kit next winter.
I have heard Scott's exhaust and it sounds great. I'm thinking stock compression with no boost might be a tad quieter.
I'm sure that you are going to enjoy it.
Steel
Resident Coonass
- Joined
- Nov 17, 2012
- Messages
- 7,849
- Location
- Cut Off, Louisiana USA
- Ride
- 2012 Roadster & 2006 Classic
I have the PCV with AT running Hanso's AF tables. Low end feels stronger. At 20 mph when I'd twist the throttle it would raise the front end some, then climb as it hit the powerband. Now it jumps straight up way faster than before. I'll have to relearn how to ride wheelies with it.
Similar threads
