I have the 3 into 2 preds and have loaded a tune from here for 3 into 1 that was written more for gas economy than performance. It popped a lot under decel so I inreased the relevent ranges as advised by a post on here. It runs (and sounds) awesome but I keep worrying if I am running lean at the...
I have a new 2008 Rocket. I am still not clear on D&D pipes? Will the 12 minute tune work. I don't wish to purchase tuneboy at this time. My bike stays in storage for 2 months at a time while I work overseas, then I ride for 3 weeks(500-800 miles). I love the bike just want more sound or better...
i was able to get in on the tuneboy groupbuy from triumph rats forum
does anyone have any suggestions for dynotune locations in or around the Chicago, IL area?
The standard R3 tunes have 4 ignition tables named I1, I2, I3, and I4 and I understand what each one is for--I1 is for neutral, I2 is for first gear, I3 is for second gear and I4 is for gears 3 - 5. Now the R3T tunes also have 4 ignition tables, but they're named I1, I2, I(TP), and I(MAP). Does...
I asked a "friend" to "program" back in the 30% power reduction in gears 1, 2, & 3. He said it would be no problem, I just had to pay for 30 mins. of shop time. Is this possible?
I'm taking Phoebe in for a couple warranty issues and her 10k service next week, what about having a dyno tune while she's there?
I've got a PCIII, TOR's, triple filters, secondaries removed and a GIPro gear position indicator with timing retard eliminator. She'll snap your head off as it is...
Hi Folks,
I'm getting ready to go on a long ride in a couple of weeks (a week or so on the road with several hundred miles a day). Right now I have Jardine's and all the above mods, but I'm thinking about swapping back to stock pipes with the bypass to get the noise level down a bit for the...
Right, since the Jardines were fitted (yesterday) I'm getting a lumpy juddery roughness around the 1200-1500rpm mark :?
Uploaded a tune (eventually)from Tuneboy 20050/2 (advise gleaned from here) but I still have the lumpy juddery roughness but now at slightly higher revs 1400-1700ish...
Tried...
When I down load a tune, at the bottom of the computer screen it say open loop conditions not met. Does anyone else see this when they download a tune? I do have the O2 eliminator and have unchecked the O2 sensor on all my tunes. There doesn't seem to be any problems just want to know if its normal.
I can't get the latest version of Tuneboy downloaded from the Tuneboy website to connect. Has anyone done this lately? What do you do about the driver? Does it load automatically from the stuff in the zip file or do you manually load it from the downloadable drivers zip file?
Ok, heres the deal. I've noticed my bike kinda surges at about 3k rpm and quits about 3.5k rpm. It only does this when I load the 20226 tune vs the 20050-3. I copied the L tables from the 20050-3 that I had fattened up. The engine sounds very smooth when its doing this and you can really only...
I've got a question for anybody running tors, bypass, stock filter, and tuneboy, I'm running the tune for that setup from the tuneboy website, I've got the dynojet O2 bypass, and the O2 box unchecked, when the bike is cold it runs a little rough, I've got the idle set for 850 rpms, is this the...
I just pulled the baffles out of my D&D's, any advice on altering the mixture or retuning the PCIII? I have the program installed for the D&D's and triple filters, anyone know if just clearing my throat is enough of a change to warrant altering the mixture any? I suppose I could just tap the up...