1. Leif Almberg

    TuneECU ignition tables next change

    I am very happy with my change of tune for the Roadster to open secondaries and new topspeed. the next thing I would like to do is to change the ignition tables to be the same all over. this is the same thing as installing a Gi PRO ATRE, although it does not exist for the Roadster yet. the...
  2. Bee Aitch Pee

    Looking for a tune

    I have not been here in a while...I have Jardines with stock airbox. I am using Tuneboy but still get decel popping. It has been nearly a year since I loaded the current tune, 20145TuneJardinesFixed(2), I think. I have been reading old posts here and see tunejardine.dat mentioned but can't...
  3. Leif Almberg

    TuneECU, ECU on Roadster is not responding anymore

    Gents, I had the 020355 Tune uploaded from my Roadster. no problems. changed to 100% secondaries on all gear, all rpm. changed to new top speed. downloaded to the bike, no problem. turned ignition off, waited 10 seconds and turned on in order to reset TPS as described in the manual. I cannot...
  4. Leif Almberg

    TuneECU ignition tables too few

    Long time reader, first time poster. I am the guy that extracted the 020355.hex map for Roadster with TORS. My friend Niklas will provide the tune. http://www.r3owners.net/trading-tunes/7504-tuneecu-free-tuning-software-14.html although I usually post at our Swedish forum, r3owners.se, I did...
  5. tdragger

    TuneECU - How to adjust for adding Triple K&Ns

    Now for a more complicated question. I'm currently running with stock intake and Staintune Exhaust w/ Cat delete. Current tune is Triumph 20226 (Aftermarket Exhaust w/ Cat delete). There exists a .dat file (Tuneboy) for the Staintune, Cat delete, full power, speedo correction. I believe...
  6. tdragger

    TuneECU - How to run diagnostics and tests

    TuneECU has a number of diagnostics and tests but, unfortunately, the user guide is a bit scant on procedures to use them. Can a Captain knowledgeable in these things help the developer out by going into more detail on each diagnostic and test? Please go into enough detail to prevent a shade...
  7. tdragger

    TuneECU - How To Balance Throttle Bodies

    To start this off, here's a simple topic. Assuming that the shade tree mechanic has the manifolds removed and is staring at the bare trottle bodies, how does one use TuneECU to balance the TBs?
  8. Power-Tripp

    TuneECU -- HOW TO

    Software and tunes - Link Removed Installation instructions in various languages - http://www.tomhamburg.net FTDI drivers - Virtual COM Port Drivers Cable - Link Removed Or try Ebay for cheaper prices. Simple over view: 1 - Download latest version of TuneECU. Unzip into new folder. 2...
  9. Need Tuneboy/Tunedit Ver 3.9.9

    I am trying to download them from the Tuneboy site Link Removed but it takes about an hour and Tunedit doesn't open for me. Anyone have the zip file that they can email to me? Or able to download it? Of course my emails to them get the same reply as everyone else's....none. Thanks
  10. GPMAZ

    R3T Triple K&N Jardines Power-Tripp Tune Dyno Results

    Took my R3T with the newly installed Jardines and a tune supplied by Wayne Tripp at Power-Tripp Performance to the dyno this morning. The results were very satisfying. A/F ratio was recorded separate from the dyno and tracked steady at 13.5:1. Don't have a printout from that device (no printer...
  11. TxRIIIRider

    Got the bike dyno tuned

    Well, finally decided to cough up $150 and get the bike tuned on a dyno. It was money well spent! I am running Jardines, and a PC-III and my Rocket has 53,000 miles. I don't have the dyno sheet to post yet, as the guys printer was down, but I should have it next week. However, the first run...
  12. Power-Tripp

    TuneECU .... free tuning software

    For those that have debated about purchasing TuneBoy, your day has come. There is freeware available that is a close copy to TuneBoy, and operates on all Triumph triples. TuneECU v1.5.3 : Link Removed Download the software (unzip it into a specific file), the description, and the key -...
  13. kwimmer

    Tuneboy shows 0 degrees timing advance

    Just got my Tuneboy and after a bit of getting up to speed, have solved a couple problems. Stuck stepper motor and TPS out of specs. I am however not showing any ignition advance, as in 0 degrees at any throttle setting/rpm. on any cylinder. Anyone familiar with this issue or what might be...
  14. needing a start tune

    Hey everyone, My bike a 2007 standard rocket with tripple k&n's tuneboy just received yesterday:D and the dynojet oxygen sensor eliminator. My bike still has stock exhaust with cat box I can't afford a new exhaust yet so i need to make do with what I have. Does anybody have a tune that would...
  15. Captain Bob

    Tunedit question

    Here is the situation.... I am a Tuneboy/Tunedit user. I recently acquired an R3T. I sent payment to Wayne for a new tunedit key. I then downloaded the latest version of tuneboy (3.9...) and loaded on my laptop. Plugged it into the R3T and launched tuneboy. Tuneboy promptly gave me the...
  16. Willtill

    Questions about 20227 standard tune for my '08 Classic

    It's been previously recommended to me; to download and use a Standard tune, as opposed to the Classic tune, due to the Standard tune preconfigured to allow for more power than the Classic tune. For the last thousand miles or so, I have been using the 20222 tune (Standard exhaust, with...
  17. Willtill

    Very weird. Differences in downloading tunes

    I'm wondering about this. I have a Rocket '08 Classic. When I first got my TuneBoy, I downloaded the Standard Rocket Tune with cat and factory pipes. The download took several minutes into the ECM. Tonight, I chose 20227 which is the standard Rocket without cat box, since I just installed my...
  18. GPMAZ

    Tune Mods for R3T with Jardines

    I'm considering swapping my D&Ds for a full Jardine system. I haven't found anyone who has installed the Jardines on an R3T. I currently have triple K&Ns with the 138HP tune for the R3T. I'm pretty sure I will need to more fuel to support the added flow of the Jardines. Does anyone have any...
  19. albertaduke

    triumph tune

    came back from the triumph dealer regarding the 2006 recall service bulletin concerning the engine shutting down at idle the technician loaded another tune but did not provide me with any explanation and the repair order does not show either. all I know is now I have tune #020219 loaded...
  20. TuneBoy and Wego AFR meter

    I am wondering if anybody has designed a spreadsheet to add trims to tuneboy based on the Wego log file? The fuel tables can be importd into Excel from TuneBoy so can the Wego AFR recordings. However it will require some fancy footwork to extrapolate the results into a trim table in Excel. I...
Back
Top