Recent content by petaksmetak

  1. Second TPS

    Now is everything OK. I erased error code, TPS is set with ISCV in Tune ECU. Now no error is displey. Thanks for advise.

  2. Second TPS

    Tonight I tried to put the sensor normally again - the tension was 4,85V. I tried to put the sensor rotated 100 degrees and then push and tension was O, 62V at 0% trottle. Upon starting the motorbikes voltage 1,95V trottle was 38%. But it still glows yellow motor alarm. A error P0223 and...

  3. Second TPS

    Thanks for the advice, you can not describe it in detail? (secondary TPS needs to be wound against its spring and then inserted) My English is very bad. Thanks from Czech Republic

  4. Second TPS

    Hello, I have a problem with second TPS. I changed primary TPS (high idle speed) and while changing I took out second TPS (I mistook these two - I thought that the one I took out is the first one but it was the second one). Now, there is an alarm of TUNE ECU - secondary TPS low voltage and...

  5. Where to buy this "wedge under engine"

    So now bike likes that: Thanks to Norseman. I will paint in black mat colors some as engine color.

  6. Where to buy this "wedge under engine"

    Hello, where I can buy this wedge under front engine? thanks. I like it.

  7. Tsukay Jumbo Strong" Hardbags

  8. Tsukay Jumbo Strong" Hardbags

    Hello, so here is how I modifikated mounting system. I bought hard bag with long Z bracket: but original was bad, bag was long distance from fender. This is foto with original mounting system. So I cut Distance between main plate and welded together front Z bracket cut about 10mm, back Z...

  9. Tsukay Jumbo Strong" Hardbags

    Mounting system wasn´t easy. I tomorrow I will try to discribe. I bought bags for Honda valkyrie, but I wanted bag so closer to bike as was posiblle, So some cutting, welding was needed. Right bag is about 10mm up to exhoust, If I put some haevy to bag, I will afraid about bag, amybe I will use...

  10. Tsukay Jumbo Strong" Hardbags

    Hello, today I instaled Jumbo strong Hardbags on rocket - about 600USD+100USD for chrome bag gril. The hardbags was painted to tribal edition. winker lights is from Ford FOcus. http://tsukayu.com/JumboStrong.html So for somebody, who dont pay for corbin bags.

  11. Fan in radiator start many times

    This winter I checked radiator, clean up with water. Some "gel" was there and refulled now coolant. But nothing change. So Today I will try to check temperature with Tune ECU....but I have problem, when I start bike, Tune Ecu stop reading from ECU and I must turn ignition of/on to connect with...

  12. Idle speed dont go down

    Hello, I finally found right Torx key, set from 0,62V to right 0,6V. Go for little ride and everything was ok. SO I´m happy. Thanks to all for good advise. I wish that TPS will be ok, and I will not need to change it.

  13. Fan in radiator start many times

    Fan is ok, check with TUne ECU. But maybe termostat, but I started bike, about 15°C on stand, and about 3minut the motor had temperature about 90°. I check radiator, and from left back side, It´s some white "splodge" .... So my friends think that maybe radiator was leaking andfirts owner used...

  14. Idle speed dont go down

    Hello yesterday after MS Hockey i check TPS with Tune ECU. So it was interesting. 1 - Conneted Wag and click on adjust TPS: I was little shock...I see 0,73V not 0,6V. So I check TPS on bike, just little "tug" cable to TPS and immediately I heard noise bzzzzzzz of trottle position "thing". So...

  15. Idle speed dont go down

    thank you, I printed it and after work I will check if TPS broken.
See more
Back
Top