TuneECU -- HOW TO

DEcosse said:

Reprogram is the command in android app - there is no "download"
Android user guide is here -http://tuneecu.com/TuneECU_En/android.html

Note also regarding bluetooth that you cannot read or reprogram via bluetooth - hardwire cable must be used

Click to expand...

zman8537 said:

OK, but it did not ask what tune that I wanted to load. I will check out the link you attached but getting ready for work now. Thanks

Click to expand...

zman8537 said:

OK, but it did not ask what tune that I wanted to load. I will check out the link you attached but getting ready for work now. Thanks

Click to expand...

• Connect / Disconnect : Connect or disconnect to the ECU.
• Read Map: Read the map from the ECU
• Reprogram: Write the map loaded in TuneECU to the motorcycle ECU. <<BE CAREFUL!>>
• Information: Information about the ECU (VIN, Serial number, Map number)

• Modify Table: Change of the characteristic maps in the tables.
  In sub menu select "modify table" mark one or several cells, wipe up or down to modify the values.
  
• Copy / Paste: Copy or Paste the entire table.
• Graphic Mode : Graphical or Numeric table display.
• F Trim global : Use the F Trim table for all « F » tables
• Commit trims: Apply each Trim table to the F & I table and reset the F Trim tables.

• Open: open a map from the TuneECU folder.
• Import table PCIII/V : Import a table PCIII or V in the trim tables.
• Information : Display the “Infos” / Comments from the map
• Parameters: Miscellaneous setting for the Map (Rev limiter, SAI, O2 sensor, speed correction …)

DEcosse said:

Menu „ECU“

• Connect / Disconnect : Connect or disconnect to the ECU.
• Read Map: Read the map from the ECU
• Reprogram: Write the map loaded in TuneECU to the motorcycle ECU. <<BE CAREFUL!>>
• Information: Information about the ECU (VIN, Serial number, Map number)

Menu „EDIT“

• Modify Table: Change of the characteristic maps in the tables.
  In sub menu select "modify table" mark one or several cells, wipe up or down to modify the values.
  
• Copy / Paste: Copy or Paste the entire table.
• Graphic Mode : Graphical or Numeric table display.
• F Trim global : Use the F Trim table for all « F » tables
• Commit trims: Apply each Trim table to the F & I table and reset the F Trim tables.

Menu „Map“

• Open: open a map from the TuneECU folder.
• Import table PCIII/V : Import a table PCIII or V in the trim tables.
• Information : Display the “Infos” / Comments from the map
• Parameters: Miscellaneous setting for the Map (Rev limiter, SAI, O2 sensor, speed correction …)

To answer your specific question, it won't ask "what" map you want to load - it will load (reprogram) with whatever map you have open on the screen
i.e. you "open" a map using "Open" from the "Map" menu then 'load' it using "Reprogram" in the ECU menu

Click to expand...

Dblbull said:

I've Ordered TORS & Ramair kit (haven't received either yet), I ordered and received my TuneECU cable from Lonelec. I've Downloaded and installed TuneECU, but still have yet to Download Drivers for the Cable.
When I have TuneECU up and running, and hooked up to my 2011 Rocket 3 Roadster, can I have my Battery Tender connected to my battery at the same time or will that screw up anything that I'm trying to do?

Click to expand...

Dblbull said:

I've Ordered TORS & Ramair kit (haven't received either yet), I ordered and received my TuneECU cable from Lonelec. I've Downloaded and installed TuneECU, but still have yet to Download Drivers for the Cable.
When I have TuneECU up and running, and hooked up to my 2011 Rocket 3 Roadster, can I have my Battery Tender connected to my battery at the same time or will that screw up anything that I'm trying to do?

Click to expand...

BigNorm said:

I was told to pull the fuse the first time and have the tender plugged in the first time since it takes so long to pull the stock tune the first time but it would probably still work just plugged in. It takes forever the first time.

Click to expand...