Now here's something interesting.
Jim, your D&D pipes, what is the diameter of these ? I would think that they are possible 4"
The stock Mufflers are some odd size, I did measure them (can't remember right at present) but think they were about 4¼" or something like that.
Your measurement of 16 3/16" would indicate a smaller diameter muffler compared to Norms TORS (I think) spaced at about 15"
Now here's something interesting.
Jim, your D&D pipes, what is the diameter of these ? I would think that they are possible 4"
The stock Mufflers are some odd size, I did measure them (can't remember right at present) but think they were about 4¼" or something like that.
Your measurement of 16 3/16" would indicate a smaller diameter muffler compared to Norms TORS (I think) spaced at about 15"
Now here's something interesting.
Jim, your D&D pipes, what is the diameter of these ? I would think that they are possible 4"
The stock Mufflers are some odd size, I did measure them (can't remember right at present) but think they were about 4¼" or something like that.
Your measurement of 16 3/16" would indicate a smaller diameter muffler compared to Norms TORS (I think) spaced at about 15"
Ok just measured the D&D's 4 inches
Stock pipes at 4 1/8 inches
Also their is plenty of play on the mounting brackets with oblong holes. So I may be a little out of square with the bike and that would throw off measurement A and that would throw off measurement B
Also measuring with a tape not calipers wil make me a bit off also.
I also think their may be a tolerance issue with mounting all the way around, a little bit here a little bit there and next thing you know + or _ 1/2 inch or so with the length of the cans a little bit goes a long way!