thread diameter and pitch on the 2011 R3T fuel cap

[TheWhingnut]

so i am working with a machinist co-worker who is making a set of tool-less seat screws out of stainless to mimic the ones found for the Bonneville. and a fuel cap also out of stainless the bike is not where i can remove the fuel cap and still have fuel in it. and he is stuck on duty for today. is it possible one of you guys have the thread dia and pitch for the fuel cap?

 

[Ygransom]

so i am working with a machinist co-worker who is making a set of tool-less seat screws out of stainless to mimic the ones found for the Bonneville. and a fuel cap also out of stainless the bike is not where i can remove the fuel cap and still have fuel in it. and he is stuck on duty for today. is it possible one of you guys have the thread dia and pitch for the fuel cap?

Unfortunately I am at work and my R3T is at home so can't measure but would be interested in seat bolts depending on look/cost.

 

[TheWhingnut]

I'll ask if he's willing to produce them if they are the bees knees. I'm getting them for the cost of a flat of monsters.

 

[KildeRouge]

The fuel cap is tightened by 6 screws diameter 6 mm and thread 1mm there are 3 short and 3 long ones

 

[TheWhingnut]

The fuel cap is tightened by 6 screws diameter 6 mm and thread 1mm there are 3 short and 3 long ones

the 2011 touring model doesn't have six screws it just has a threaded fuel cap. my R3T is on a truck headed east to VA so i can't measure its threads to machine a S/S one.