Swapping your floorboards for pegs. It's easy.

[brsmits]

I have a touring but wasn't a fan of the floorboards. I'm too used to pegs. So I started swapping parts with another user, and I took my first ride today on them. It's great!

Here's what you need to swap:

Right side:
Floorboard rail with three bolts up front and two in back.
Master Cylinder.
Brake line coming from master cylinder that threads through the frame to a vertical bracket.
Everything circled in Red

Left side:
Floorboard rail with shift lever attached
Gear linkage assembly (the double sided adjustment screw AND the clamp piece on the transmission side it)
all of this:

Just start unbolting things. Swap them. Eventually you'll end up with a touring that looks like this:

 

[warp9.9]

I have a touring but wasn't a fan of the floorboards. I'm too used to pegs. So I started swapping parts with another user, and I took my first ride today on them. It's great!

Here's what you need to swap:

Right side:
Floorboard rail with three bolts up front and two in back.
Master Cylinder.
Brake line coming from master cylinder that threads through the frame to a vertical bracket.
Everything circled in Red

Left side:
Floorboard rail with shift lever attached
Gear linkage assembly (the double sided adjustment screw AND the clamp piece on the transmission side it)
all of this:

Just start unbolting things. Swap them. Eventually you'll end up with a touring that looks like this:

The feller who got the floor boards is lucky. I've been wanting to try a touring set in place of my classic boards. Mostly because of the skid plate style board protection.