Starting down performance mods road

maxrider

Standard Bore
Joined
Jul 2, 2008
Messages
5
Location
Whitehorse, Yukon
Hi there, I have a 2005 R3. So far it has full Corbin load including fairing and bags, plus TORs, cat bypass and new (today) tuneboy tune. I also own a 1997 Vmax with a few performance mods, and some improvements to chassis and suspension.

I really like the torque of the Rocket and am now searching for a bit more. Not ready to make the big leap of forced induction as I am using the bike for touring, so sticking to other bolt ons. Next up is likely the triple K&Ns and maybe then an aftermarket full exhaust system.

Anyway, wanted to say hi and thanks for all the tips I have been reading regarding the tuneboy.

cheers, Terry
 
Welcome to the site, you've come to the right place with any questions. Unfortunately I can't be of much help for the additional mods, the Rocket is plenty for me in it's stock form....but there are plenty of others who, I'm sure, will step in and give you advice.

Dennis

18 dtg Dubai
19 dtg Home
 
Yes, welcome. Lots of different routes to go down. Pigger will help you along as others will, I'm sure.

If you go the filter (K&N route), I stock the 3 under bearclaw plus the at sensor and the breather refit filter for immediate shipment. I'm working on the o2 sensor delete and the plug for the bung.

Good luck in your adventure.
 
You sound like someone we know. Lots of someones as a matter of fact. Shouldn't have any trouble getting some more umph out of her as many here will have lots of suggestions Maxrider. Welcome. I'm still learning how to do crazy things with mine in the stock form. :eek:
 
Back
Top