Speedometer and Ecm

Kevin frazier

Widowmaker!
Joined
Dec 22, 2018
Messages
7,610
Location
Nashville
Ride
2008 Triumph rocket 3 touring
I purchased a 2011 speedometer and ecm off a 2011 rocket touring with 11000 miles from penwalls and did not need, problem fall detection switch. Anybody interested in these items
 
Wow, wish I would have seen this earlier. I just bought a speedo from Pinwalls. But the speedo, odometer, fuel gauge and signal canceling switch are not working. They have a video of it working on the bike it came off. I'll need to look into that fall detection switch, how did you discover that that was the issue? Did you need to replace or reset it? If I end up needing the ecm I'll be sure to contact you.
Thank you,
 
For me the road speed switch on the bottom of the ignition was culprit, fixed all the speedometer cluster issues, speed self cancelling blinkers
 
Kevin frazier said:
For me the road speed switch on the bottom of the ignition was culprit, fixed all the speedometer cluster issues, speed self cancelling blinkers
Click to expand...
Mine is touring yours is a classic in your avatar? Completely different
 
Be aware that the speedos from 2009 and before are very different from 2010 onwards. They are not cross compatible. A pre 2009 can however be fitted with aftermarket speedos - Post 2010 CANBUS bikes cannot. The touring is different again.
 
You must log in or register to reply here.

Similar threads

Saddlebag locked and will not open
Replies
7
Views
777
Starmanut
She's home and in the garage, c'mon spring!
Replies
5
Views
691
MtlSteve
Speedometer not accurate
2 3
Replies
23
Views
3K
wjb
Speedometer not working
2
Replies
14
Views
2K
Kevin frazier
What are the infill panels called and where to order it from?
Replies
1
Views
743
cr0ft
Menu
Log in
Register